What should I do if the kitchen sink has a circle of glass glue blackened and deteriorated and leaki

It is best to re-glue and choose a mold-resistant sealant. The glass glue is blackened, aging and leaking, which is due to the fact that the glass glue belongs to the organic, the glass glue of the kitchen sink is wet due to the water for a long time, such an environment leads to the appearance of the glass glue and the crevices between the breeding of many molds and other microorganisms, after a long time, the outside of the glass glue and the gaps will become black, and at the same time, these molds will also absorb more dirt and bacteria, which will eventually lead to aging and even water leakage, and this situation can not be completely removed.

Extended information: 1. Use: One-component silicone glass glue can be used immediately, it is easy to beat it out of the plastic bottle with a glue gun, and its surface can be trimmed with a spatula or wood chip.

4. Bonding: AWipe the metal and plastic surfaces completely to remove the grease, and then except for the plastic that rinses the entire surface with acetone first, the rubber surface should be sanded with sandpaper and then wiped with acetone.

When using acetone, please observe the precautions for using this solvent. B.Apply the glass glue evenly on the surface of the object that is ready, if you are gluing the two surfaces, you can find a position on one side first, and then squeeze the other side with enough force to squeeze out the air, but be careful not to extrude the glass glue.

C.Place the bonded device at room temperature and allow the glass glue to cure.

5. Sealing: When silicone glass glue is used for sealing occasions, it is also carried out in accordance with the above steps, and the glass glue is squeezed into the joint surface or gap to make the glass glue fully in contact with the surface.

6. Cleaning: The glass glue can be wiped off with a cloth strip or paper towel before curing, and after curing, it must be scraped off with a scraper or scrubbed with a solvent such as xylene and acetone.

Reapply the glue until it does not leak and keep it dry.

The glass glue is moldy and black, which copy

It is because glass glue bai is an organic matter, du

Due to the moisture of the glass glue in the bathroom, there will be many microorganisms such as mold and bacteria growing on the surface and gaps of the glass glue, and after a long time, the mold will be covered with the outside of the glass glue and the cracks and turn black, and at the same time, the mold will absorb more dirt and bacteria, and the final aging will fall off, which cannot be completely removed, so it is best to re-glue and choose an anti-mildew sealant.

Sealant sealing glue is a sealing material that deforms with the shape of the sealing surface, is not easy to flow, and has a certain degree of adhesion. It is an adhesive used to fill the gap in the configuration and act as a seal. It has the functions of anti-leakage, waterproof, anti-vibration, sound insulation, heat insulation, etc.

It is usually made of dry or non-dry viscous materials such as asphalt, natural resin or synthetic resin, natural rubber or synthetic rubber as the base material, with inert fillers such as talc, clay, carbon black, titanium dioxide and asbestos, and then added plasticizers, solvents, curing agents, accelerators, etc.

It can be divided into three categories: elastic sealants, liquid sealing gaskets and sealing putty.

It is widely used in the sealing of construction, transportation, electronic instruments and components.

Do not scrape off and re-bai hit the glass glue, which du

A method zhi is a very earthy method, Yongdao

Far from being finished, it will have to be redone every 6 months at most. Go to Taobao to buy two "nano ceramic soil" to completely solve, I also used it last month, the effect is very good, especially suitable for family use, because he is used the same as glass glue, unlike some other products to professional construction personnel to make the effect, otherwise it is ugly. And the effect is really as hard and shiny as ceramic.

Shovel off the old glass glue, fix it from the new, and keep the cabinet doors open for ventilation.

Carefully observe whether there is any leakage in the drain pipe of the vegetable washing basin.

High-quality glass glue generally does not age and deteriorate, "buy glass glue at the store that makes fish tanks".

It is necessary to scrape off the original old glass glue and recoat it with a new one. There are now anti-mildew and waterproof glass glues for kitchen and bathroom on the market. The cupboard under the sink is drained of stagnant water and ventilated for a few days.

Call a small worker, shovel off the original glue, re-glue the glass inside and outside, keep the cabinet open for a few days, dry it thoroughly, and look at the drain pipe of the sink to see if there is any leakage, if so, repair it together.

I shoveled the aging glass glue and did it.

The glass glue is mildew and black, this is because the glass glue is an organic matter, the glass glue in the bathroom will have many molds and other microorganisms growing on the surface and gaps of the glass glue due to the moisture of the water, and after a long time, the mold will be covered with the outside and cracks of the glass glue and turn black, and at the same time, the mold will absorb more dirt and bacteria, and eventually aging and falling off, which cannot be completely removed.

It is best to re-glue and choose a mold-resistant sealant.

Re-glue it so that it doesn't leak and stays dry.

Stay away from the trouble of glass glue black, moldy and leakage? Just use: porcelain clean bright plastic steel clay, after curing, it is as smooth and dense as ceramic, and will never be black and moldy.

This will definitely solve your problem.

I encountered a similar problem to you, I used to buy dehumidifier to solve, and it cost a lot of money every year, and then I bought a bottle of good glass glue, a pair of gloves, and lifted the basin myself, cleaned it first, and then hit the glass glue, and then it was done, no longer need dehumidifier, just polluted a pair of pants!

Now I found a big trouble: the stainless steel pool for washing dishes and vegetables in the kitchen is connected to the artificial stone countertop, and the original decoration master used a circle of glass glue to seal and waterproof, but now the glass glue is basically aging and blackened, and it is no longer possible to achieve the effect of waterproofing. So much so that when I opened the cupboard under the sink that had not been opened for a long time, I was greatly shocked

There is a lot of sewage in it, fortunately, there are a lot of bowls here, and most of the sewage is taken away by the bowls, but the wood that flows out of the cabinet is still soaked and deformed, and there is a lot of mold, black, damp and unpleasant. It took half a day to clean, and after cleaning, I hung it out, closed the cabinet door, and opened it the next day. It's too strong, after careful analysis, it's still because of the leakage, although I took something to catch the water, but the inside is too damp and easy to mold. Now I'm asking for help, is there any good way to solve the problem of water leakage caused by the aging of this glass glue?

Is it going to be re-glued or is there some other way to stabilize it?