The bathroom floor drain is leaking, can it be repaired without tiling?

Updated on Bathroom 2024-01-27
6 answers
  1. Anonymous users2024-01-23

    If you don't smash the floor tiles, it will be difficult to repair, because you don't know the specific location, only smash the ground to re-do the waterproof layer, and carry out a 24-hour water storage experiment to no longer leak, and then lay the floor tiles, and be sure to protect the waterproof layer when laying the floor tiles.

  2. Anonymous users2024-01-22

    It's hard to say, if it's the floor drain and the sewer interface that seeps water outward, see if you can pick up the floor drain and apply waterproof materials; If it is a leak from the sewer pipe below, it is basically impossible to solve it without digging, more information, better advice, free professional technical consultation for concrete waterproof leakage repair.

  3. Anonymous users2024-01-21

    If you don't remove the tiles, you can try grouting waterproofing.

    Waterproof grout is generally calculated by needle, but the material is divided into oily and water-based, but the difference between the two materials is not very big.

    Generally, it is water-based, and in many places water-based can be done, but people will not use oil-based.

    If you get an injection, the market is not the same, the price is different, and it is generally 200-300 for a needle.

    If the area is not large, one stitch is generally about the same.

  4. Anonymous users2024-01-20

    Generally, it is caused by the lack of compactness of the concrete around the floor drain pipe and the lack of waterproofing. In fact, this kind of leakage treatment is very easy to do. Use CF-2000 cement-based waterproofing agent to treat it yourself in half a day.

    The specific steps are: Find a chisel and use the chisel to make a 2-3 cm wide annular groove around the floor drain. The depth is about 3 cm.

    However, if there are loose or gaps around the pipe during the slotting process, it should continue to be chiseled. Until the above situation is cleared up. Then clean the groove with a clean water brush.

    Fill the tank with CF-2000 cement-based waterproofing agent in the form of paste, and then use it when the waterproofing agent collects water (about 30 minutes), and then compacts and smooths it with a press.

  5. Anonymous users2024-01-19

    Yes, use asphalt, heat the asphalt and spread it over.

  6. Anonymous users2024-01-18

    Yes, knock on the floor drain. Then make a layer on the edge of the floor drain with waterproof or water-proof water.

Related questions
19 answers2024-01-27

It is not necessarily the problem of floor drain, it may be that the water pipe joints in the wall are loose and leaking, and the most problematic problems in the waterproof structure are the corners of the wall and the edge of the floor drain pipe.

2 answers2024-01-27

Naturally, there are products in the waterproof market that can be waterproof and plugging leaks without smashing bricks. Kitchen and bathroom do not smash brick waterproofing agent, you can consider it, the working principle is that the permeable components and crystalline components penetrate into the mortar layer through the gaps of the floor tiles to react to form a mixture of colloids and crystals, and form a whole with the structural layer, which plays a role in plugging leakage and waterproofing, and the effect is obvious.

5 answers2024-01-27

This is possible, usually the pipe connected to the floor drain and the outlet end of the washbasin drain pipe are on the same pipe, they are just different in location.

5 answers2024-01-27

Of course, it is a pity to smash the tiles, and the cost is high. You can try the kitchen and bathroom without smashing bricks waterproofing agent, and take a look after you get it, it is specifically for bathroom leakage, as long as the pipe is not broken, you can do it. If it still doesn't work after the construction is completed, it proves that the pipeline is ruptured, and you need to find a company that specializes in repairing the pipeline.

3 answers2024-01-27

Waterproof wallpaper can be pasted. The surface PVC is thick, the waterproof performance is excellent, it will not absorb water when exposed to water, and it also has the functions of anti-mildew and anti-fading. Waterproof wallpaper is treated by a special process, and its waterproof performance is better than that of other wallpaper types. >>>More