-
Anonymous users2024-01-23The mirror front lamp is mainly considered waterproof and anti-fog. There are three main types: lamps, energy-saving lamps and lamp beads. It is recommended to choose energy-saving lamps, because the wattage is low, the production temperature is not high, and the fogging is reduced.
Another is that the switch should be installed with a splash-proof socket. The height generally depends on the height of your mirror, and it is difficult to have a unified standard for this.
-
Anonymous users2024-01-22At present, bathroom mirror headlights are mainly classified into lamp tubes, lamp beads and energy-saving lamps. The choice of bathroom mirror headlights mainly considers waterproof, anti-fog, in case of electric shock accidents, the bathroom will be wet to make a splash-proof box, it is best to choose a low wattage, the temperature is not high, can reduce the fog generated.
-
Anonymous users2024-01-21The installation height generally depends on how high the mirror is, and the mirror front lamp is installed according to the height of the mirror, and the power cord of the mirror front lamp is reserved between 1600 and 1900. Be waterproof, otherwise the lamp will break easily.
If you only have one lamp, it is recommended to install it on the top surface. Even if the area of this bathroom is not large, if the mirror headlight is installed, the location must be on the side of the wall, and the power of the mirror headlamp is small, resulting in insufficient light at a distance from it, which is not conducive to night activities. In fact, since the top surface and the wall can be installed, I don't know why you can only choose one place to install? >>>More
It is better to use one with acrylic plate.
Mirror headlights have both decorative and lighting functions, because their installation position is basically higher than the height of reach, so the mirror headlamp itself is generally without a switch. The switches are mostly set in a position that is convenient to control and conforms to the overall layout.
There are many reasons for tripping I don't know how your line can go and I dare not conclude that the yellow line and the blue line of the trip are wrapped with insulating tape Connect the red line and another blue line, the bath bomb lamp you see if the red line is the live line, and then see if the zero line is the blue line, the 4 yellow lines should be 4 groups of outgoing lines are connected to the heating 2 groups of lighting 1 group ventilation 1 group First connect the bath bomb line The bath bomb line is directly connected to the plug for the zero line, remember not to make mistakes, other color lines are connected casually, the bath bomb is installed and then install the switch, the blue line depends on whether the main zero line is connected, If there is no connection, you can connect the neutral line in front of the mirror, and then touch the yellow wire with the live wire respectively to distinguish the electrical appliances controlled by each wire, and then connect to the corresponding terminal port of the switch according to the actual control line, and finally the red wire can be connected to any of the 4 wiring holes. There will be live work in the process, please take protective measures and pay attention to safety!
1. The bathroom must need bright and soft light, and it must be avoided when choosing a ceiling lamp. >>>More