-
Anonymous users2024-01-231. Cut off the power supply first, find a ladder beam or stool to cushion the foot, and stand on it to check the integrated ceiling light.
>2. Use a small screwdriver to knock from the seam of the aluminum gusset, and use your fingers to pick down the lampshade and lamp board.
>3. Wei Yanling holds the front end of the finger bulb with his hand, turns the bulb counterclockwise, takes out the damaged bulb, and installs the new bulb into the integrated ceiling lamp according to the standard installation method.
>4. Reinstall the removed lampshade and lamp board.
-
Anonymous users2024-01-22First of all, remove a piece of the gusset next to the lamp (with a suction cup or a sticky hook), then remove the lampshade, and then press the tube of the same model.
Finally, press the lampshade and the removed gusset.
Precautions: 1. Take lightly, do not use too much force, otherwise the lampshade and gusset are easy to deform; 2. Remember the original installation direction, it is easy to produce color difference when pressed backwards.
The bulbs that make up the ceiling are not produced by the ceiling manufacturer. It's all OEM. That is, it is commissioned to produce by a bulb manufacturer.
When you replace it, try to choose a well-known brand bulb, which is more thermally efficient and safer. 。Use a professional suction cup to suck off the panel of the lighting module, and change the lamp tube!
But you have to find a professional to do it! Remove the plate adjacent to the lamp, lift the lamp, or move it to the other side of the board, and replace the bulb or board. Generally, it is who gives the installation and who changes it.
The integrated ceiling has a series of lamps, his lamp is composed of two parts of the mask and the top seat, there is a special suction cup, if not, you can also use the kind of thing that hangs clothes to suck on the wall, suck the mask down, and then change the lamp, the lamp tube is buckled by the buckle, and it is easy to take it down!
-
Anonymous users2024-01-21The integrated ceiling has a series of lamps, his lamp is composed of two parts of the mask and the top seat, there is a special suction cup, if not, you can also use the kind of thing that hangs clothes to suck on the wall, suck the mask down, and then change the lamp, the lamp tube is buckled by the buckle, and it is easy to take it down!
-
Anonymous users2024-01-20The bulbs that make up the ceiling are not produced by the ceiling manufacturer. It's all OEM. That is, it is commissioned to produce by a bulb manufacturer.
When you replace it, try to choose a well-known brand bulb, which is more thermally efficient and safer. 。Use a professional suction cup to suck off the panel of the lighting module, and change the lamp tube!
But you have to find a professional to do it! Remove the plate adjacent to the lamp, lift the lamp, or move it to the other side of the board, and replace the bulb or board. Generally, it is who gives the installation and who changes it.
Installation Tools:
Percussion drills, toothless saws, rulers, drop wires, screwdrivers, booms, etc. >>>More
Personally, I think that the integrated ceiling electrical appliances are better than Aoweishi, and the quality and after-sales are good.
It is usually prying open with an oiler's shovel blade stuffed into the gap between the two allegroes, and can be replaced with something similar. If you are afraid of trouble, find a decoration worker in your community to get it, and it is estimated that you will not sell it without 50 yuan.
First, take off the bath bomb lamp;
Second, use a knife to warp an integrated plate down at the gap of the integrated plate, and you can take an extra piece. >>>More
You can't change the light, see if the driver is broken, the driver can be replaced if the driver is broken, you can't fix the panel if it's broken, you can only replace it with a new one, what kind of panel take a photo and send it to me, see if it can help you.