What are the causes of leaks in the bathroom

Updated on Bathroom 2024-01-27
4 answers
  1. Anonymous users2024-01-23

    Water seepage in the bathroom, 1 because of the waterproof layer.

    After it was done, it was broken by external factors in the later stage.

    Bad; 2. There is no waterproof layer at the beginning.

    Do. Now the house is well renovated.

    After that, it is common to leak water again

  2. Anonymous users2024-01-22

    It turns out that the waterproofing is not done, so let's do it again!

  3. Anonymous users2024-01-21

    If the waterproof layer is broken, find a professional to repair it.

  4. Anonymous users2024-01-20

    The cause of water leakage in the bathroom, most of the time, is caused by the water leakage upstairs.

    1: There is water on the upper wall near the package riser, which may be a leak in the upper layer; It could also be that the upper layer leaked and leaked down the pipe.

    2: There is water on the lower ground near the package riser, which may be the upper layer leaking down the pipe, or it may be a problem with the riser, the joint, valve, and cleaning port of the household.

    3: Water seepage from the top of other walls and water seepage at the bottom of the roof must be the reason for the upper layer.

    4: Water seepage in the ceiling may be caused by the ground on the upper floor, or it may be the leakage of the pipes in the ceiling of the household (the sewer pipes of the household and the upper floor).

    5: Water seepage in the middle of the wall, the most likely is the leakage of the buried pipeline in the wall.

Related questions
8 answers2024-01-27

1. The cause of water leakage.

1) Waterproofing is not done well. >>>More

4 answers2024-01-27

Water seepage in the bathroom, 1 is because after the waterproof layer is done, it is damaged by external factors in the later stage; 2. The waterproof layer was not done well at the beginning. Now the house is decorated after the phenomenon of water leakage again is very common, if you don't want to smash the bricks to do waterproofing, you can try the kitchen and bathroom do not smash the brick waterproofing agent, this does not need to smash the bricks, and does not affect the normal use of the bathroom, it is very convenient.

1 answers2024-01-27

Water seepage in the bathroom: 1. The construction of the water inlet pipe did not meet the requirements, resulting in the seepage of the water pipe in the later use 2. The sewer pipe is not firmly connected to the limb, resulting in falling off 3. The waterproofing on the upper floor is not done well, resulting in water seepage through the wall.

3 answers2024-01-27

There is only one possibility for the bathroom to leak, and the waterproofing is not handled well. If the toilet is leaking, the seal is not properly installed. Or the glass glue seal is not tight. Hope it helps.

1 answers2024-01-27

Can you describe it specifically?,Is it the water leaking from the bathroom?。。 Can you describe the specific leakage location? It's too simple to write like this.