-
Anonymous users2024-01-23Theoretically, the live wire (red wire) is required to be connected to one end of the switch first, and the other end of the switch is connected to the binding post in the center of the lamp head.
In this way, when the switch is not pressed, there will be no power when the bulb is replaced, and if it is reversed, it is easy to change the bulb in danger.
This one on Taobao is also good (small button, waterproof switch, self-centering, plastic, plastic, 12MM, red, non-locking, 3A125V 1A250
-
Anonymous users2024-01-22Hello, when installing, the button cap is taken off, fixed to the panel, and then the rest is inserted. In order to indicate the function of each button and avoid misoperation, the button cap is usually made into different colors to show the difference. For example, red means stop button, green means start button, etc.
The main parameters, type, mounting hole size, number of contacts and current capacity of the contact of the pushbutton switch.
Can not see clearly. Pull off the power switch and reconnect. >>>More
The neutral wire enters the switch, and the live wire enters the lamp head. Then connect the other end of the switch with the other end of the lamp head, and it's OK.
Is it imaginary? The bathroom button is not unified by national regulations, and it seems to be off topic to ask this question, do you want to say that the bathroom of the train is open and unmanned, and the inexplicable bathroom red button ......? Speechless!
The bedside table switch socket wiring, if it is single-open, the live wire enters and the fire wire exits. >>>More
It's very simple, the incoming line is connected to L, L1, L2 to your bedside L1L2, L out, zero line through.