-
Anonymous users2024-01-23It is necessary to find out the leakage point and repair it as soon as possible, otherwise it will wet the wall in a large area and affect the habitation. I hope my answer can help you.
1. Check the cause of the smell of the toilet sewer.
1. Check the floor drain and ensure the tightness of the installation, and the poor sealing can be filled with groove joint. >>>More
The toilet reserves the distance between the sewer and the wall, and the toilet selection tool can be 30 cm to 40 cm according to the room type of the toilet and personal preferences, which is relatively normal, and the strong one who can reserve 20 cm in actual operation, and the actual distance from the center line of the sewer, the actual distance of the bridge deck can be 32 cm to 42 cm, and there will actually be an error of 10 cm, which is very normal.
One: the indoor pipe must be deodorized, and the second is that the pipe must be sloped.
The method you said is OK, but you must install the flue check valve, there will be no sequelae when the flue check valve is installed, only five floors with 110mm PVC pipes are barely enough, of course, it is best to be more than 160mm.
Use brickwork to ensure the pipe.
Using bricks to ensure management is the first method used, because it is used on the surface of the brick and then cement plastering, and then paste porcelain blind bricks or something, generally speaking, the sound insulation effect is good, but it takes up more space. >>>More