-
Anonymous users2024-01-23In the paint workshop of a regular furniture factory, putty (plastering), color repair, sanding, and painting are made. The intensity is not great, and the treatment is not high.
-
Anonymous users2024-01-22Furniture industry ash is a general term, that is, putty construction (each place will be a little different). The general version refers to caulking and repairing eyes (such as nail right eyes, insect eyes, gaps, knots, etc.), as well as a full batch of priming.
After the furniture is sanded, the process before painting is called batch ash, and the fine pores and roughness of the board are collected and filled with ash, or after the furniture parts are primed, they must be filled a second time for quality requirements. There is also a process of repairing damaged furniture, also known as ash repair, which is the scope of ash work.
Ash filling is mainly used to fill holes, mainly to fill the nail holes, seams, wooden eyes, cracks and other defects of the white embryo. Wooden furniture ash repair tools Raw materials: 1
A piece of board with nail hole or rough wood product with nail hole 2One jar of one-component nail eye repair putty (water-based nail eye ointment) 3A scraper (commonly known as putty knife) 4
A piece of sandpaper for sanding (240) Wooden furniture ash filling steps Method: 1Plate grinding (sanding the burr on the nail hole with sandpaper) 2
Clean up the dust impurities in the nail hole (blow off the dust in the nail hole with the air compressor air tube) so as not to affect the adhesion of the putty3Use an ash knife to take an appropriate amount of putty to fill (the putty should be stuffed into the nail hole as much as possible, and it is not appropriate to apply a layer at the nail hole) 4Perfect repair (generally ordinary nail repair can be completed once, for individual nail hole repair after the need for a second repair) 5
Clean up the dust after sanding (use 240 sandpaper to sand the remaining putty around the nail hole).
-
Anonymous users2024-01-21After the furniture is light, the process before the oil self-painting is called batch bai
Ash, the pores and roughness of the board, fill with ash, or after priming the furniture parts, it will be filled for a second time for the sake of quality requirements. There is also a process of repairing damaged furniture, also known as ash repair, which is the scope of ash work.
-
Anonymous users2024-01-20There are two kinds, 1. After the furniture is formed, there are some unsatisfactory places, which should be scraped putty to supplement, and 2. The furniture putty part is polished and beautiful.
Dude, nine times out of ten, the lathe workers in the furniture factory let you make leather sofas and leather beds, car wood? Nonsense! The lathe workers in the machinery factory belong to the special type of work.
Hello, in Dongyang Geyi Mahogany Furniture Factory, the senior ash master told me that it is necessary to pay attention to the first, we must check whether the surface of the furniture is scraped and smooth, otherwise the ash is more troublesome or the ash will be turned over and not easy to deal with; Second, check whether there is a place that needs to be repaired or whether there is a defect, and be sure to deal with it until there is no problem before operating, otherwise it is easy to cause unnecessary trouble! Secondly, we must insist on the sand from coarse to fine when dusting, grind through and grind in place, and the hand shape of sandpaper should be in place when playing sandpaper, otherwise it is easy to blister and other symptoms!
The service balcony is generally connected to the kitchen, and it is usually a closed balcony, and many people put gas stoves, washing machine storage shelves, etc. on the service balcony. There are also open balconies where household central air conditioning units, large water heater storage tanks, gas risers and meters are placed (depending on the climate and regulations of different regions). A small number are connected to the dining room and the workers' house.
There are many types of jobs, depending on what position you choose before you go in. There are some basic things that Master brings, and high-end things that people won't let you do for the time being, so I hope to adopt them.
If it is a skilled carpenter master who recommends to participate in the research and development of new products in the sample group, so that the income is high and can be exposed to a lot of new things, if you enter the assembly line, you can only do a link like a screw, not to mention the repetition of machinery every day, you can not contact new things, and the income is low! >>>More