How to deal with gypsum board walls and ceilings novice tips

First use caulking putty to fill the gap, pay attention to make the caulking putty into the gap, not limited to the surface of the "entry", the surface should be flat, after drying, then use the bandage into a right-angle shape to stick to the gap, the white latex with the bandage must be a good quality product; Then batch the putty, and then roll the latex paint after polishing.

According to the decoration style, the modern European, American and other styles are different, you can look at other people's renderings on the Internet.

Use latex paint to fill.

If you want to avoid the cracking of gypsum line joints to the greatest extent, you must pay special attention to the acceptance of the ceiling base process: 32313133353236313431303231363533e78988e69d8331333433626432. It is better to avoid plaster lines being installed on wooden boards, and the quality of the paint on the walls should be acceptable. If every link is done well, cracks still appear due to thermal expansion and cold contraction. >>>More

Laying direction, fixed transversely and longitudinally.

The strength performance and deformation of gypsum board are determined according to the direction, and the longitudinal performance of the board is superior to the transverse, so the longitudinal part of the gypsum board is not allowed to be parallel to the covered keel when the ceiling is suspended, and it should be perpendicular to the keel, which is an important measure to prevent deformation and cracking of joints. >>>More

Gypsum board modeling ceiling yellowing, to figure out the cause of yellowing, so as to be targeted: >>>More