How do I remove the clear tape stain from the security door?

There are two simple and easy ways to do this:

1) Stick it with the same transparent tape: take a small piece of transparent tape and wipe the glue stain with your fingertips, which takes a little time, but it is very clean, which is the feeling of "the bell must be tied to the bell";

2) Use the heating method: use a hair dryer to heat the glue stains, and when the glue stains melt and become soft, they can be easily wiped off with a soft cloth;

Due to work reasons, I have used both of the above methods myself, and they are very useful.

Here are some suggestions you can try:

1. Use soap and a little ammonia and turpentine to mix liquid, which can remove a lot of dirt and make the glass surface more shiny (this article is applicable to ceramic tiles, ceramics, glass, etc.).

2. Use viscous transparent glue to repeatedly stick and tear, you can remove some of the surface 3, wipe it off with a little sodium water, or use paint thinner 4, you can use a hair dryer to dry, and then gently scrape it 5, wipe it with a cotton swab dipped in nail polish remover.

6. Wipe the wind oil essence.

7. Use a special detergent or sneaker detergent to wipe it.

8. Use the 4B eraser for drawing to be very soft, and you can erase it with the Korean eraser.

9. If the traces that have been left for a long time have hardened, you can use a hot towel to soften it before trying.

Method 1: Scrub with a little paint thinner or gasoline, and then rub it with a little Belle-Franc.

Method 2: Use a special detergent or sneaker stain remover to wipe it.

Method 3: Rub gently with a scoping cloth and cleaner, but the progress is quite slow.

Method 4: Wipe it with a cotton cloth dipped in acetone a few times, but it must be used sparingly, because acetone will damage the paint of the security door. Go to the building materials market to buy acetone, there are 500 ml.

Blow hot with a hair dryer, rub again, and try.