When decorating, which method is the best way to separate dry and wet in the bathroom?

The so-called dry and wet separation of the toilet refers to the separation of the toilet into two and the separation of dry and wet. It can not only keep the venue dry and hygienic outside the bath, maintain the overall environment of the bathroom clean and beautiful, improve safety, prevent water splashing and falling, but also extend the service life of the equipment. In recent years, the separation of dry and wet toilets has become more and more fashionable and necessary.

There are many ways to separate wet and dry bathrooms, each with its own advantages and disadvantages.

You can't say which one is the best, you should consider many aspects according to your actual situation to choose the most suitable method for you. There are many ways to separate wet and dry in the bathroom. The first is a transparent glass partition, which is suitable for families with large bathroom spaces.

The advantage of using glass partition is that the bathroom looks fashionable and simple, and the aesthetic sense is better, followed by the ability to supplement a strong light source, without adding another light source, and the shortcomings are experienced by yourself.

The second method is to use frosted glass for partitions, which is probably accepted and used by many people, because relatively speaking, privacy, light source, and fashion sense can meet the requirements, depending on personal preference. The third red method is to build a separate shower room in the bathroom, using all-glass partitions, with curved and square shapes, but the requirements for glass doors are higher.

The fourth method is to use a wall partition, which has the best anti-overflow effect, and can be installed on the wall to install a shelf to facilitate showering and fully maintain privacy. The fifth can use a half-wall partition, this method has both the convenience of lighting and wall shelves, and there are many ways to separate dry and wet in the bathroom, and it is necessary to judge which is the most suitable method according to the actual situation of your family.

Personally, I think these 5 ways of separating dry and wet are the best, 1. The handwashing station is external.

Placing the vanity on the outside, which is aimed at a relatively small bathroom, is gradually becoming one of the most common designs for this type of house. This design completely separates the bathing and washing areas. If you have only one bathroom in your home, then the practicality of this design can be highlighted, and there will be no competition for a bathroom.

2. Diamond-shaped glass shower room.

Diamond-type dry and wet separation, that is, through a diamond-shaped shower room to show, this kind of dry and wet separation has certain requirements for space area, and is generally designed in the corner of the wall, using swing door or swing door design, in and out of use is also very convenient. The glass is basically made of tempered glass, which is firm and safe. And in winter, it also has a good thermal insulation effect, which is not easy to catch a cold during bathing.

3. Curved glass shower room.

Compared with the decorative shower room, this shower room is generally placed in the middle of the bathroom cabinet and the toilet, which can well solve the problem that the swing door cannot be realized. The curved design has a smooth surface and is not prone to bumps.

4. Single-leaf glass partition.

For those small bathrooms, it is very important to plan and use the space wisely. If you have a bathroom that is less than 4 square meters, and you go to make a shower room, it is simply not too crowded. Although we can't do a shower room, we can do this design and use a single glass partition, so that there is no need to install a shower curtain, and even enhance the sense of space, and water stains will not splash out, and the implementation effect is very good.

5. Solid wall partition.

If your bathroom is very spacious, you can ignore the previous designs and try a solid wall partition. The shower area is directly separated by a partition wall, which has a perfect separation effect of dry and wet, and is one of the common designs of large bathrooms.

Introduce several kindsThere are several ways to separate and make partitions:

1. Cheap and easy-to-install shower curtains.

2. Glass partition that does not affect the light: half partition.

3. Glass partition that does not affect the light: full partition.

4. Partition wall with a more sense of space.

1. Shower curtain partition

The bathroom at home is not big, and I want to do dry and wet separation, and I can't open a shower room. The solution to this problem is actually very simple, just add a shower curtain to your home. You can choose a décor and pattern that suits the overall style of the bathroom, or if you want to have a crisp and airy feel, you can also choose a transparent or frosted texture.

Shower curtains can't block the leakage of water from the ground, you can

1. Set a slope in the shower area to make the water flow to the floor drain;

2. A small threshold, professionally speaking, is a waterproof strip to block the flow of water.

2. Glass semi-partition

The semi-glass partition can not only have the effect of visual expansion, but also take a bath without stuffiness, especially suitable for small bathrooms.

If you're worried about the water flow on the ground, it's the same with the shower curtain:

1. Do the ground slope, water flow to the floor drain, or simply install a long floor drain with faster drainage;

2. Install waterproof strips to temporarily trap water inside.

3. Full glass partition

The fully enclosed partition creates a new independent space, and the glass partition has better light transmittance, and there is no need to worry about getting wet all over the floor.

Fourth, solid wall partition

If your bathroom is large enough, consider using a partition wall as well. The wall will make the bathroom more spacious, more privacy, and can also be used as storage on the wall.

Wet and dry separation in the bathroom. There are three modes that people have passed on by word of mouth, semi-open, solid wall, and free-standing. From the sink to the shower area.

Flexible planning so that functions no longer interfere with each other. Reasonable spacing can also better protect everyone's privacy, and the separation of spacing and dry and wet is actually one. The intervals that can be planned here are glass intervals, wall intervals, and shower curtain intervals.

Each of these methods has significant limitations. So today, I will hand over to you a method of separating dry and wet toilets, I hope it can help you.

1. Make a slotted shower room.

Sunday Reading Reward Delivered! Get it now!

Make a groove on the advertising ground, the center is high and the four sides are low. When bathing, water drains from all sides, so it drains quickly and does not accumulate water. People are not afraid to slip when they stand on high places.

Matching the sinks on the floor is the shower room. Shower rooms are commonly curved, rectangular and diamond-shaped. Nowadays, the diamond type is more popular, which is beautiful and does not take up space.

2. Make a niche in the bathroom.

Friends who have passed through know it. The humidity in the bathroom is very heavy, and the average cabinet will become moldy and deformed in a few years. So nowadays many people make an alcove directly in the wall to store things.

After attaching the tiles, not only do you not have to worry about moisture, but it is also very hygienic. It looks like the appearance is also leveraged.

3. The toilet is partitioned independently.

Some bathrooms are longer underneath and shorter in depth. This makes it possible to make a separate room for the toilet shower and wash in a separate room, which is very effective and easy to clean. Killing two birds with one stone, and dealing with problems such as dry and wet separation.

But many people are used to having a bathroom. These two bathroom doors are afraid of going wrong.

4. The handwashing station is laid out outside the bathroom.

Nowadays, many home improvement designers will issue the customer's request, and the two areas of the handwashing station and the bathroom are designed separately. This way, washing hands and getting into the register and getting in the rain won't interfere with each other. Avoid rush hour congestion when using the restroom in the morning.

It also avoids the embarrassment of smell in the bathroom. And toiletries are not easy to breed bacteria when they are placed outside the bathroom.