What kind of board is good for furniture, beds, wardrobes, etc.? How

Hello.

The furniture panels used in modern times are generally made of centimeter woodworking boards, and centimeter finger-jointed integrated boards can be selected if conditions permit.

The advantages of finger-jointed integrated plates are that they are strong, flat and beautiful.

Select the woodworking board to see the flatness, whether the specifications meet the standard, and press down the middle part of the board with your hand to see if there is a slight sound, if there is a secondary board.

On the cross-section, the woodworking board is better to see whether the middle layer of wood is a large material, and the general specification is more than 5 cm.

whether the surface of the board is cracked, etc.

Finger jointed integrated board to see if it meets the specifications and whether there is a phenomenon of bending and arching.

[There are three points to distinguish the simplest plate: ].

1。Touch - whether the surface is smooth.

2。Knock - Hold up a piece of plate and then knock on its plane to see if there is a crunch, if there is a crunch sound, it indicates that there is a hollow.

3。Smell - whether there is a pungent odor, if there is a certificate that is not environmentally friendly.

Wardrobe bed furniture.

Generally, 15 centith splint is used as the bottom plate of the back plate. THE SOLID WOOD PANEL IS 3MM THICK. The middle shelf can be added with a 15 cleat.

Lumber Of course, the best is the log material. The second is knuckle board, the price of both of which is relatively expensive, the middle point is woodworking board, the almost point is MDF, and the worst is the hydrogen safety board.

The fir blockboard is more cost-effective, and the thickness of the fir blockboard with good quality is up to standard, smooth, neat at the edge, and there is no pungent smell.

Blockboard Nine centiboard veneer Pinch the corner of the blockboard and knock it on the floor a few times Try it to understand.