-
Anonymous users2024-01-23If it is pasted on, first of all, the original foundation surface should be flat, and then the glue must be evenly brushed with a brush, and the glue layer can not be thick or thin. After sticking on, it is necessary to fix one end of the whole surface under pressure, and remove the auxiliary device after the glue solidifies.
It is good to install it directly on the wooden keel, and the edge is stuck, but it depends on the force of your keel and side jamming.
-
Anonymous users2024-01-22It's not easy to get, it's best to install it directly on the wooden keel, and the edge is stuck, but it depends on the force of your keel and the side card.
Your current situation is that the plate stretches and deforms the glass, and the glue thickness is uneven.
-
Anonymous users2024-01-21Oh, this is easy to do, you fold the stainless steel plate on all sides, and then fix it directly on the keel, I am a dry stainless steel, and I know more about this.
-
Anonymous users2024-01-20There is no need for woodworking boards, and it can be hung directly thickened.
Two methods: welding with oxygen, drilling with an electric drill.
1. The area is large, not easy to fix, there will be protrusion in the middle, if it is pasted up, first of all, the original foundation surface should be flat, and then the paste glue must be evenly brushed with a brush, and the glue layer can not be thick or thin. After sticking on, it needs to be fixed at one end of the whole surface under pressure, and the auxiliary device is removed after the glue is solidified. >>>More
If you don't have any special requirements, it's better to be stainless steel. Good care, good stability, no oil absorption, will not rot and insects because of a long time.
Hello, the stainless steel iron door is still quite good, but pay attention to check whether it is a renovated old door, you can pay attention to the turnkey process. Under normal circumstances, the packaging of the new security door is intact, the installer packs it in front of the customer, the key should be in the package, the packaging of the key should also be complete, the lock cylinder should be installed in front of the customer, and then the key is handed over to the customer after the lock is installed.
It is best to use a brushed surface, the mirror surface is easy to scratch, and there can be no convex and concave graphics, so that although it looks good, it is not easy to clean, if you want to do better, you can do no fingerprints.