-
Anonymous users2024-01-23The float is stuck, the water is full and does not go up, open the toilet lid, and adjust it.
-
Anonymous users2024-01-22If the mobile phone is flooded, you need to perform the following operations:1Disassemble the whole machine 2
When removing the screen, gently separate the chiplet that connects the screen to the motherboard from the motherboard. 3.Before removing the metal shielding partition, the network access card and the card slot sticker under the network access card must be torn off.
4.Take a hair dryer and blow dry, not on the screen for a long time, such a high temperature will destroy the screen5Blow the front and back of the motherboard to make sure that there is no moisture left, and try to blow out the water at the earpiece.
6.Put the disassembled mobile phone in a noisy place, preferably for about two days, and then install it.
The water pipe is laid next to the toilet bowl (preferably buried in the wall), where a triangular valve is installed, which is connected by a hose to the water inlet connection behind the toilet.
The world's best water parts are Gaboli, Switzerland, and are currently used in mainstream domestic brands, such as Wrigley, Faenza, and so on. >>>More
The method of removing the water inlet switch of the toilet is very simple. The first thing is to turn off the water inlet switch under the toilet tank, then put the water in the toilet tank clean, then remove the snakeskin hose at the water inlet of the water tank, and unscrew the cap from the bottom of the water inlet pipe of the water tank, and you can take the water inlet pipe and accessories out of the water tank. The tool for disassembly can be disassembled with a wrench.
When there is no water in the water tank, the float lowers and opens the valve to start replenishing water, and when the water reaches the limit height of the float, the valve is closed.
There is a water pipe control at home! I turn it off and remove the inlet valve for a wrench and clean it