How to take down and replace the integrated ceiling lamp when it is broken?

1. The integrated ceiling is a combination of metal square plate and electrical appliances. Generally, it is divided into heating module, lighting module and ventilation module. It has the characteristics of simple installation, flexible layout, and convenient maintenance, but because of the integration, it also causes many people to replace the lamps and lanterns without knowing it.

2. Illustrate the replacement process of integrated ceiling lighting fixtures.

1. Use suction cups or suction cups similar to small hooks to disassemble the ceiling plate;

2. Remove the ceiling plate with a suction cup, and remember to use an object that is too sharp to avoid scratching the ceiling plate;

3. Remove the ceiling gusset;

4. Remove the lamp panel that needs to be replaced;

5. Take out the faulty and damaged lamp;

6. Replace the lamp with a new one;

7. Connect the power socket of the new lamp;

8. Restore the lamp panel;

9. Restore the disassembled integrated gusset to its original state and complete the repair.

My dear, I have seen your question!! No need to ask repeatedly! Don't ask!

No need to ask repeatedly! The time limit for replying to the platform is within 24 hours! I'll reply in a hurry when I'm free!

00。Please remember not to send a problem consultation at other times, which will affect the efficiency of the consultation, and please understand that it will not change.

Hello, the light of the integrated ceiling in the kitchen is broken, and the method of replacing it is as follows:

1. The small hook is used as a suction cup. 2. Suck off the gusset and remember to use a sharp weapon.

3. Take the gusset plate. 4. Remove the lighting panel. 5. Remove the lamp. 6. Put a new lamp in it.

7. Plug in the power socket. 8. Cover the light panel. 9. Buckle the panel next to it and you're done.

Kitchen integrated ceiling lamp purchase skills 1, installation and cleaning must be convenient: the key point of choosing an LED integrated ceiling lamp is to see whether the LED integrated ceiling lamp you choose is easy to install and disassemble, and it must also be cleaned, so that in the daily cleaning process, it will save a lot of trouble, even if it is replaced again in the future, it is also very convenient.

Hello, if you feel that my answer solves the problem for you, please give it a thumbs up. (Comment in the lower left corner) your effort, very important to us, your recognition is the driving force for my progress, if you feel that my answer is still satisfied, please click on my avatar next time one-on-one consultation. Thank you and I wish you good health and a good mood!

Pull the switch first, and then replace it with a screwdriver.

Before replacing the lights in the ceiling, the main electrical valve needs to be pulled down. Then use a slotted screwdriver to insert it into the gap of the aluminum gusset, warp the aluminum gusset up a corner, and then remove the aluminum gusset by hand, then you can take off the bulb inside, replace it with a new bulb, and finally install the aluminum gusset back.

Flat ceilings are installed, and dust can be removed from the surface with a clean broom. For flat ceilings, you don't need to clean them frequently, and you can generally clean them every three months.

First of all, after the power is off, use a professional suction cup to suck off the panel of the lighting module, and then remove the plate adjacent to the lamp, lift the lamp, or move it to the other board, replace it with the newly bought bulb, and replace it with a buckle plate stuck back. The board can be lightly cocked with the tip of the wallpaper knife, and then gently hold the bottom to take a piece of the gusset down with some force, pay attention not to scratch the ceiling board.

It's fine, as long as you drag it down in a circle evenly. Most of them are taken down by the cover, and the shelves that hold the lights and wires can't fall off it.

You first take off the adjacent ceiling, and then see if this lamp has a separate boom, which can be taken here. Some are placed directly on the keel, and then the lamp cover (i.e. glass) is snapped on. So you have to fold the adjacent ceiling to see it, and when you see the structure, you know how to take it.