About the painting of solid wood doors

The paint surface is too thin, easy to touch off, it is best to have two Li trapped bushes on the bottom side, if you save a little should also be a bottom side is better, the ruler only because the thickness of the lacquer cherry directly affects the beauty and life of your door, so it is recommended to spray it twice more.

The door is made of white pine, which can be sprayed with white paint, and the process is as follows:

1. Detect whether the wooden door is made to meet the requirements, and the moisture content should be coordinated with the local climate 2. Use sandpaper to remove burrs, wooden thorns and other debris.

3. Paint it with a sealing primer.

4. Further remove burrs and wood thorns after drying.

5. Use putty such as putty to scrape and polish, which generally requires two to three layers (open can avoid this step).

6. Paint the white primer 2-3 times (open painting can be done once) 7. Further polish and repair the defective parts with putty.

8. Paint the topcoat two to 3 times, and the last time you need to polish it for the last time.

The paint surface is too thin, easy to touch off, it is best to have two bottoms and one side, if you save a little, it should be better to have one bottom and one side, because the thickness of the paint directly affects the beauty and life of your door, so it is recommended to spray it twice more.

You can spray paint on it, but you have to sandpaper to sandpaper, or it will not be smooth after spraying. Spray paint depends on the degree of spraying, generally one time is not enough, several more times can cover the color of the wood itself.