How do I remove the ceiling light from the bathroom?

Wind heater bath bomb? There is a buckle groove next to it, and it is best to do it professionally, if you do it yourself, you can go to the store to see the same lamps and lanterns, and see that the lamps and lanterns are structured in hand.

Different shapes of ceiling lamps have different disassembly methods.

1. Round ceiling lamp.

Round ceiling lamps are one of the more commonly used ones at present, and their disassembly method is very simple. First cut off the power supply, and use a screwdriver to remove the screws around the lampshade, and then remove the lampshade in a rotating way, and finally you can directly take the bulb and change the bulb.

2. Square ceiling lamp.

The square ceiling lamp is a unique kind of ceiling lamp. Although the square ceiling lamp may seem simple, the method of disassembly is very complicated. The first is to turn off the power and remove the lampshade, since it is square, you have to start with the four corners.

Then use the hook to absorb the aluminum alloy part, and then slowly pull it down, pay attention to adjust the angle, and do not destroy the ceiling lamp. When you remove the lampshade, you will be able to see the bulb.

The ceiling light in the bathroom can be removed in the following ways:

Step 1: Turn off the power to ensure safety;

Step 2: Use a screwdriver to remove the 3 screws around the iron ring of the lampshade, and then rotate the lampshade until it is unscrewed;

Step 3: Remove the bulb.

Extended Materials. Ceiling lamp is a kind of lamp, as the name suggests, because the top of the lamp is flat, and the bottom is completely attached to the roof when installed, so it is called a ceiling lamp. The light sources include ordinary white bulbs, fluorescent lamps, high-intensity gas discharge lamps, tungsten halogen lamps, LEDs, etc.

The most popular ceiling lamp on the market today is LED

Ceiling lamps are often used in various places such as homes, offices, and entertainment venues.

Answer 1: Remove the lampshade first, there is a small arrow on the edge of the lampshade, and press it with your hand to release it; 2. Then you can see the wiring inside, remove the wire with a screwdriver, and then remove the chassis; 3. If it is an embedded lamp, it is generally fixed with a live clip, and it can be disassembled directly, which is very simple.

This is a special lamp for integrated ceilings, you can directly press and hold the round glass lampshade with your hand and rotate it counterclockwise, and then directly unscrew the bulb to go to the integrated ceiling store to buy the same bulb and install it.

This is a ceiling lamp for integrated suspended ceilings. You can use a utility blade to insert into the side seam and pull down directly with the plate.

Use the wallpaper blade to insert the edge gap between the lamp and the ceiling, and pull it down after two activities!

1) Pinch the edge of the garden and drag it down. (if not holistic).

2) Push the square plate upwards. (if it is whole).

Before solving the problem of how to dismantle the ceiling lamp, we must know what the installation procedure of the ceiling lamp is, when installing the ceiling lamp, the expansion bolt will be used to fix the ceiling lamp, and the size and number of expansion bolts will be determined according to the style and size of the ceiling lamp, and the number of expansion bolts used must be understood clearly when dismantling, so that the normal progress of the removal work can be facilitated. The ceiling lamp has two wires when wiring the power supply, try not to put the two wires under the same fast metal sheet when dismantling, so as to avoid the danger of short circuit.

Specific methods:1When the round ceiling lamp is removed, you only need to rotate the lampshade a few times, and the chassis also rotates, and when you rotate to a certain position, you will see that there are three buckles, and you can easily remove the lampshade by holding the buckle, and there will be expansion bolts left at the top of the ceiling lamp, at this time you can remove it or not, in fact, it is recommended here that you do not take it off, and it can be used in the installation of new lights.

However, when dismantling, we must pay attention to turning off the power supply to avoid the harm caused by short circuit.

2.There is a style of ceiling lamp is embedded, the surrounding of the embedded ceiling lamp will generally be designed with an open button, as long as it is pressed, the lampshade will be opened, and the removal work under the ceiling lamp is extremely simple.

Specific methods:1When the round ceiling lamp is removed, you only need to rotate the lampshade a few times, and the chassis also rotates, and when you rotate to a certain position, you will see that there are three buckles, and you can easily remove the lampshade by holding the buckle, and there will be expansion bolts left at the top of the ceiling lamp, at this time you can remove it or not, in fact, it is recommended here that you do not take it off, and it can be used in the installation of new lights.

However, when dismantling, we must pay attention to turning off the power supply to avoid the harm caused by short circuit.

2.There is a style of ceiling lamp is embedded, the surrounding of the embedded ceiling lamp will generally be designed with an open button, as long as it is pressed, the lampshade will be opened, and the removal work under the ceiling lamp is extremely simple.

Circular ceiling lamp dismantling method:

When disassembling the round ceiling lamp, you should first see which type of ceiling lamp is installed in the home, the new ceiling lamp has three small buttons next to the lamp base, open the small buttons, and the lampshade will fall off; The old-fashioned ceiling lamp has three screws next to the lamp holder, and the lampshade can only be removed by unscrewing the screws. The base of the ceiling lamp is fixed on the roof with screws, which is relatively simple when dismantling, and the ceiling lamp can be removed by directly removing the screws.

Square ceiling lamp dismantling method:

There is a kind of recessed ceiling lamp in the square ceiling lamp, which is generally fixed directly to the ceiling or the outside of the ceiling during interior decoration, and the nut is not visible, so it is more complicated when dismantling. This kind of lamp is fixed with two spring pieces at the back, and when disassembling it, you need to grasp the two frames with your hands, pull it down slowly, and at the same time, you should also drag the ceiling lamp.

Crystal ceiling lamp dismantling:

Crystal ceiling lamps have gorgeous and noble characteristics, and are generally more expensive, but now they are also used in the living room or bedroom. There will be a lot of crystal or glass accessories on the crystal ceiling lamp, when disassembling the crystal ceiling lamp, you must first remove the accessories, then remove the lamp tube, and finally remove the ceiling plate.

Just twist the lid there.