What to do if the bathroom drain is blocked

What should I do if the sewer is blocked? It can be used with a spring-loaded pull hook, with a turning spiral, built-in spring, and easy handling of soft materials.

It's very troublesome to block the floor drain, come and learn this trick.

Some pipes will be scaled after a period of use, so that the inner diameter of the pipeline becomes thinner and affects the normal sewer discharge, this dredging must use high-pressure water to clean the pipeline, remove the dirt on the inner wall of the pipeline, and expand the inner diameter of the sewer pipe.

1.Water pressure dredging: If the bathroom sewer is blocked, you can wash away the debris by water pressure, first you need to use a pipe to connect the faucet with the sewer, then block the other gaps in the sewer, and then turn the faucet to the maximum to unclog the sewer through the impact of water pressure.

Wire hook dredging: The bathroom sewer is blocked, you can also use the wire hook to dredge, the bathroom sewer blockage is generally caused by hair, the wire hook is stretched into the sewer to lift back and forth, take out the hair and other debris in the sewer, and the bathroom sewer can be dredged.

You can use the support handle of the home to align it at the mouth of the sewer, and then put half a pool of water, and under the action of suction and pressure, the toilet can also be opened.

Go to the market and buy a special pitot for toilets, aim it at the sewer mouth, pound it hard, and under the action of suction, the toilet can also be passed.

Sewer Unclogging Agent: It is the best product on the market right now, this product is very effective for clogging caused by hair, greasy, paper towels, etc. It is used to dredge blockages such as washbasins, wash basins, floor drains, toilets, etc.

It does not damage sewer pipes, including PVC pipes, and the use method can be used according to the above instructions.

Blockage of drains and drains. From the common sense point of view, the blockage of the floor drain is mainly hair, and it is easy to deal with the blockage, we use some boiling water, vinegar, and soap foam mixture to the sewer pipe, soften the hair, lubricate the hair, and then pick up a large bucket of water and rush it. So easy！

You can find a hose (the distance from your house's tap to the sewer outlet) is sufficient.

Connect tap water at one end and wrap a rag at the other end and plug it into the sewer pipe. Turn on the tap water and you're good to go.

The principle is; The pressure of the tap water is about 4Mpa and it is completely enough to flush down the drain in your house.

Don't let the hose leak at both ends to keep the pressure at its highest!!

There is no way to find a master.

Pro,, the toilet drain is blocked to take the following methods: 1, add the dredging agent to the appropriate warm water, pour it into the sewer together, and wait for about 10 minutes to dredge. 2. If the hair is clogged, hook out all the hair in the sewer and use it normally.

3. Pour appropriate white vinegar and baking soda into the sewer, white vinegar and baking soda will have a strong chemical reaction to dredge up. ”

Dear, you can continue to consult other related questions.

1. Hard passage for the toilet that is often blocked, you can use a soft and hard soft ventilation tube to insert it, while passing down and filling it in, the speed is not too fast, until the dredging is done, and then flushing inside, this method is very good Injection" is our common "pipe pass", this tool is cheap, only a few dollars, but the effect is leveraged, for slight blockage to the disease. 3. Irrigation For objects that are easy to decompose after soaking in paper scraps or other water, you can pour some boiling water into the toilet first, soak for some more time, wait for these objects to soften or soak away, and then pour a large bucket of water when the sewage is discharged. 4. "Medicine" is also the toilet spirit, although this thing is not 100% effective, but I have to say that it is still more effective for some specific situations.

How, is it an easy way to do it? In addition, we should remind everyone that you should pay attention to one point when using it, try to avoid those hard objects or non-soluble items falling into the toilet, and if possible, try to use water-soluble paper, which can greatly reduce the situation of the toilet being blocked.

Go to a small hardware store to buy a dredger, a few yuan, come back and do it yourself, you can solve the problem, how to use the dredger, the store owner will tell you, it is easy to learn.

The bathroom drain is blocked, and you don't need to spend money to find someone to fix it, pour a bowl of it, and it will be dredged automatically immediately.

Answer 1: If it is some small objects that cause the blockage of the sewer in the bathroom, it is actually easier to solve, because we can wash away the blockage inside with the help of a certain impact force through water pressure. You need to block the gap first, then pour in a large amount of water, or simply turn on the faucet and turn the water to the maximum for a few minutes to effectively unclog the pipe.

2. If the blockage is serious, it may not be solved in this way. We can use duct unclogging agents ourselves at home. not to be made.

Prepare baking soda and white vinegar, mix and stir well in a certain ratio, then pour into the drain. Wait until it dissolves, then increase the faucet and rinse it quickly, and you can quickly solve the problem of clogging.

3. Sometimes the sewer in the bathroom is blocked because there is some paper or hair, we can use a spring dredge or a wire to make a hook, slowly put it into the pipe, and then pull out the blockage inside.

Question: Something hard may have fallen in.

If you point in that stainless steel material. In this case, you can only find a professional person to dredge the pipe, and you need to use the machine that dredges the pipe to dredge the question.

Refill the drain with water at the level of the ground, then wet it with a large, thick towel, seal it on the mouth of the sewer, and press it down, try a few more times, and you can use the pressure of the water to flush the drain away.

Open it first to see if there is any hair or something else, if you don't buy a pack, it's good to pour it inside, I hope it can help you.

1.When it gets clogged, we can try it out at home. We can buy a 2-meter pipe dredging device, bend its head, and then put the dredge into the pipe while draining the water, shake it while shaking it, repeat it a few times, and at the same time should dredge it every other week in the future.

If a professional comes, you can use manual methods first, do not pour water, or you can surround the pool to prevent water from splashing. Of course, everything else has to be put away. And you have to make sure that it is dredged in a short time, otherwise the smell will be very strong.

2.If the sewer is full of water, then we need to press the plug down hard, and then lift it hard, so that it will form a certain pressure and pumping force, which can flush away the clogged debris in the water pipe; But if it's stuffed too hard, I'm afraid only the serpentine pipe will do, and you can also use the wire mentioned above, but this is expensive and difficult to get, so it's easy to find someone to dredge it, and there is also a thing called pipe dredging agent, which is sold in supermarkets, and you can also try it.

1.When we use it, we accidentally discharge foreign matter, and it is difficult to discharge it when it gets stuck in the water pipe, which causes the sewer to be blocked.

2.The water pipes have been used for a long time, and there are excessive oil stains and dirt accumulated in them.

3.If your sewer pipe is small, not straight, and has many elbows, it is easy to get clogged sewers when you use it.

4.There is also a situation where we accidentally drop cement into it during installation and construction, which causes a blockage in the sewer.

1.Most of its clogging is caused by grease, so it is recommended that we can remove the grease from the plate first when we wash the plate, or try to wash it with warm water.

2.In the mouth of the sink, we need to clean the surface of the garbage in a timely manner, and it is best to install a filter device, and then clean it regularly.

3.When the water in the sink is used up, we can first put the dirty water in the sink at one time, and when the water flows out, this can form a certain momentum, flush the swag in the sewer, and the garbage on the pipe wall is not easy to form.

4.When the weather is cold, we can use hot water to scald the pipe about once a week, but it should be noted that the temperature is not too high to scald, so as not to deform the pipeline, so as to effectively prevent the blockage of the pipeline, or even avoid the blockage of the pipeline.

Clogged sewers are a common problem in life, and it is a headache. Especially in the bathroom drain, the blockage is often some hair and fibers on clothes. Moreover, the sewer of the bathroom has a cover, which is very complicated to unblock.

But with the right unclogging method, unclogging the bathroom drain is also very simple. Next, we will introduce common methods for unclogging sewer pipes in the bathroom.

Please click to enter a description of the image.

1.Baking soda unclogging method. Prepare a container and pour some baking soda and salt into it in the same ratio of salt to baking soda.

Mix well and pour it into the drain, then pour some white vinegar into it, wait for about 10 minutes, and then pour boiling water into it, so that the hair inside can be completely removed.

2.Wire dredging method. Find a wire, break one end of the wire into the shape of a hook, and insert the wire into the drain to pull out the blockage. If there is no wire at home, you can also find some long strips to replace it, which can also play a role in dredging.

Please click to enter a description of the image.

3.Pipeline dredging agent dredging method. Go to the market and buy a pipe unclogging agent that specializes in unclogging sewers.

Take out about 40 grams of dredging agent and pour it into the sewer, add another 1 kg of water, wait for about 10 minutes, and wait for the pipe dredging agent to fully react; Pour another 40 grams, add 1 kg of water and wait for 10 minutes; Wait for 20-30 minutes, rinse with a large amount of water to dredge. It is most suitable for dredging blockages caused by various organic substances such as grease, hair, vegetable residue, paper cotton fibers, etc., and at the same time, it can also remove the foul smell of the pipeline, kill the bacteria and parasites of the pipeline.

Please click to enter a description of the image.

The above are common methods for unclogging bathroom pipes. Most of the toilet sewer blockages are due to hair, which is easier to clean, if it takes a long time, there will be some grease and cosmetics residues attached to the hair, which will block the sewer. Therefore, when you notice a slight sign of blockage in the sewer, you should clean it up.

If it is blocked and you can't dredge it yourself, you can ask the maintenance personnel to help.