What is the material of solid wood MDF

In one wardrobe it is better if both are used. The back board uses MDF, and the laminate uses solid wood particle board, which can not only take advantage of the good flatness of MDF, but also make use of the environmental protection advantages of solid wood particle board, which can create an environmentally friendly living environment to the greatest extent. Let me explain the advantages and disadvantages of the two types of boards.

MDF is also known as MDF, which is a kind of man-made board made of wood fiber or other plant fibers as raw materials, crushed, fiber separation, and dried with urea-formaldehyde resin or other applicable adhesives, and then hot-pressed. Advantages: The material is relatively fine, and the edge of the cutting surface will be sealed well, so that it is not easy to open the glue.

It is easy to press into various shapes and make shapes, so there are usually more door panels or back panels. Disadvantages: Because the substrate is powdered as raw materials, more glue is used than particle board, which is more likely to cause environmental problems.

Secondly, due to the glue content of the MDF, the internal structure space is less, and the moisture resistance is poor, a piece of density is soaked in water for 24 hours, and it is obvious that the four sides of the MDF are raised and deformed after more than ten hours. In addition, solid wood particle board is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. The principle is the same as that of MDF.

Advantages: 1) The inside of the solid wood particle board is a granular structure with a cross and staggered structure. Therefore, the nail holding force is good, and round nails and screws can be nailed.

These machinability properties are significantly better than MDF. 2) The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is more retained, and the content of solid wood particle board is generally less than 5% in the use of adhesive, which is more environmentally friendly. 3) Solid wood particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and is not easy to bend when hanging heavy clothes.

At present, the wood-based panels used in the European furniture market are mainly solid wood particle boards. Disadvantages: The flatness of solid wood particle board is not as good as that of MDF, and it is more difficult to do curvature and modeling.

At present, in the European market, for the sake of environmental protection, it is basically based on solid wood particle board, and most of the domestic manufacturers also use solid wood particle board as the base material of the cabinet.

The full name of MDF is MDF, generally MDF is made of wood fiber or other plant fibers as raw materials, applied urea-formaldehyde resin or other nuclide synthetic resins pressed under heating and pressure conditions, and other suitable additives can also be added to improve the characteristics of the board, its main performance is that the internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, the surface is smooth, can be secondary processing, can be pasted, rotary cutting veneer, planing thin wood and paint paper, etc., can also be directly painted and printed decoration.

MDF. It is a type of MDF, in which there are also long and short boards. Wood fiber or other plant fiber is used as raw material, and urea-formaldehyde resin is applied after crushing, fiber separation, and drying.

or other suitable adhesives, and then hot-pressed to make a kind of man-made sheet.

1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.

2. The surface is smooth and smooth, the machinability is good, and the planed thin wood, patterns and novel and beautiful decorative paper can be pasted on it, so it is deeply loved by people in home decoration and is often used to make furniture, partitions, etc.

3. The middle border and the middle clip strip that can be applied to the painting in modern decorative frameless paintings, are registered trademarks of the state.

This is how the frameless picture of visual life is applied, making life more environmentally friendly.