-
Anonymous users2024-01-23Need to scrape Preparation: 1. Wall inspection of decoration wall treatment Before decorating the wall treatment, the most important thing is to check the wall to see if it is solid and smooth. If there are cracks or holes in the wall, they need to be repaired and leveled with plaster.
2. Preparation of materials for decoration wall treatment Protect the materials and furniture in the room and clean the floating dust in the room. Then roll the concrete interface paint evenly on one side, and after it dries, you can start scraping the putty. If it is a newly built wall, you need to wait for the 28-day cement curing period before scraping putty.
Treatment work: 1. Scraping putty for wall treatment Generally, the wall can be scraped 2 times putty, and the wall with poor flatness needs to be scraped several times, and the more serious ones need to be leveled by gypsum first, and each putty scraping needs to be more than 2 hours. 2. Putty grinding for wall repair After the putty is scraped, the grinding can be carried out at night, with a bulb of more than 200 watts close to the wall, and the flatness can be checked while grinding.
Grinding is prone to generate a lot of dust, so you need to be prepared to wear a mask. 3. Brush primer for decoration wall treatment Clean the dust left by the grinding putty on the wall, apply the primer evenly, and wait for the primer to dry. 4. Brush the topcoat for wall repair treatment Under normal circumstances, the topcoat usually needs to be brushed twice, and it only takes 2-4 hours to wait for it to dry after the first brush.
The second pass will take 1-2 days.
1. Try to use light bai
Steel keel to make the ceiling, wooden dragon du >>>More
In the case of double packages, the routine is included, and in the case of light industry, it depends on how you and the ceiling boss talked about it at that time.
1. Shovel the ash and stick it firmly with anti-crack tape; 2. Re-scrape the ash, polish it after drying, and paint it! Note: If the base is not firm, repair it first and then press the two cloths for construction! Hopefully!
No. Nail the anti-rust paint, then scrape the putty, polish it, and finally brush the latex paint.
According to the expansion area, for example, the ceiling is 10 square meters, and the 3-level ceiling is 3 square meters, which is 10+3 A total of 13 square expansion areas.