How to deal with water leakage and seepage in public toilets?

If you put it in the past, you definitely need to remove the tiles and redo the waterproofing, since last year, there are new waterproof materials on the market that can be waterproof without smashing bricks, it is recommended that you use the kitchen and bathroom without smashing the bricks waterproofing agent, do not need to remove the tiles from the root to completely solve the problem of bathroom leakage.

Hello, of course, do not smash bricks, find professional personnel to deal with, the effect is good, the construction period is short, and the price is satisfied.

1. Treat the dust, oil, and stagnant water on the surface, and keep the surface dry;

2 If the tile joint is filled with caulk, a small groove needs to be cut with a knife;

3. In the cement parts such as tile surface, tile joint, wall joint, pipe root, etc., spray penetrating waterproofing agent, which must be sprayed evenly;

4. After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulking paste, and the weak links such as around the pipe root are reinforced;

5. The connection between the ground and the wall and the pipe root are made of plastic steel mud as waterproof edges;

6. After the waterproof construction is completed, the construction site should not be drenched within 24 hours.

Solution:

Treat the dust, oil, and stagnant water on the surface, and keep the surface dry;

If the tile joint is filled with caulk, a small groove needs to be cut with a knife;

In the ceramic tile surface, tile joints, wall joints, pipe roots and other cement parts, spray penetrating waterproofing agent, be sure to spray evenly;

After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulk paste, and the weak links such as around the pipe root are reinforced;

The connection between the ground and the wall and around the pipe root are made of plastic steel mud as waterproof edges;

After the waterproof construction is completed, the construction site cannot be drenched with water within 24 hours.

To make the bathroom waterproof, it is recommended that you first need to find the cause of the water leak

1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it is necessary to repair the pipeline in time to solve the water leakage problem;

2. If there is no problem with the pipeline, then consider that the waterproof layer is not done well and cause water leakage, if the local water leakage is serious, it is recommended to do the waterproofing again, so as to fundamentally solve the problem.

More than 80% of the water leakage in the bathroom is concentrated in the yin and yang corners, pipes, sanitary ware, floor drains and other places, so it is recommended to use kitchen and bathroom waterproof slurry when doing waterproofing, first repair and strengthen these permeable parts, and then do waterproofing as a whole, so that the waterproof effect is better.

However, remember to carry out standard construction according to the requirements during construction, so as to ensure a good waterproof effect.

There's no way, you have to smash it, it's waterproof and redone, otherwise what else can you do?