How to deal with air in the middle of the veneered solid wood floor?

Updated on Solid wood 2024-01-28
2 answers
  1. Anonymous users2024-01-23

    Planning before choosing a floor is indispensable.

    1. Household flooring is more cost-effective than floor tiles.

    Flooring is the latest popular decoration material and is cheaper than traditional floor tiles. If you want to save money by decorating the floor, you also need to consider the decoration style at home and choose the right floor according to the decoration style.

    Flooring and floor tiles are found throughout the renovation and maintenance process, and flooring is more cost-effective. If there is floor heating at home, if there is a problem, the floor is removed and repaired, and then assembled. The floor tiles have to be broken and re-paved, so that they need to be purchased again.

    2. Reasonably plan the floor paving area and purchase on demand.

    In order to reduce the waste of flooring in the decoration process, it is best to plan the area of the floor that needs to be used, plus the number of losses, and select it to prevent the waste of excessive floor purchase. Common laying methods for flooring: three, six, nine and one-half.

    The paving method of 369 is a stepped gap structure, which usually saves materials, and the material loss is about 3%; The loss of one-half paving is the largest, about 5% higher, but the ground of this kind of laying is neat and symmetrical, and the visual effect is better.

  2. Anonymous users2024-01-22

    The air is drained and glued to it.

Related questions
1 answers2024-01-28

Solid wood floor film is not good, wood products have a lot of pores, need to maintain gas interaction air circulation, keep the floor dry, if the film is pasted, the temperature deviation is too large, there will inevitably be gas (water) on the film, the consequence may be the floor bubble arch, the floor deformation.

2 answers2024-01-28

There are generally three ways to lay solid wood flooring: 1. Direct laying. Ground leveling, laying moisture-proof and waterproof layer, laying moisture-proof film, solid wood floor splicing; Low cost, suitable for dry, high-rise, old houses, the floor can be removed and reused; 2. Laying the keel on the ground. >>>More

1 answers2024-01-28

1. After the floor is paved, it should be moved in within two weeks. In a room that is not occupied for a long time or is not infrequently occupied, several basins of water should be placed in the room and the amount of water should be maintained, or. >>>More

1 answers2024-01-28

1. Keep the floor dry and clean, and avoid contact with a lot of water. It is not allowed to scrub with corrosive liquids such as alkaline water and soapy water to avoid damage to the paint film, and it can be wiped with a wrung out cotton mop, not with a wet mop, gasoline, flammable materials and high-temperature liquids. >>>More

1 answers2024-01-28

Generally, it is difficult to say what the cause is for cracking and peeling, it may be the cause of cracking or construction of the floor, or it may be paint.