How much is a 3D TV background wall in a small living room

This depends on the size and craftsmanship of the background wall, which is usually about four or five hundred pieces per square meter.

Nowadays, many background walls are printed through UV printers, and UV printers are used as background walls for personalization and customization.

It has a pivotal position, it can definitely be customized renderings, the tile background wall is now a good development prospect, the decoration is beautiful and atmospheric, the production of ceramic tiles and glass background walls is completed by printing patterns on the UV printer, and the production cycle is short, which is also determined by the needs of the market. The printing cost is about 6-10 yuan per square meter, and the price of the printed tile is usually about 6-10 times the price before printing, which can be said to be very profitable.

The operation is simple, choose the right printing material, the background wall gallery manufacturers can provide the latest gallery, set up a direct printer, not only can print 3D effect, but also can print relief effect.

The principle of printing tile background wall relief, through the computer graphics software to outline the lines to be printed, through the UV printer to print up. The principle is to first pile up white ink to outline the line, and then apply color, and the printing depth is 5mm.

The tile background wall can also be used synchronously with the engraving machine and the UV printer to make the carved background wall, which is used to make the background of the carved ceramic tile more, and the specific process flow is as follows:

1. Use a sandblasting machine or other treatment methods to remove the glaze on the surface of the tile;

2. Engraving machine engraving pattern; [When the engraving machine engraves the pattern, you need to set it accordingly, and select the area that needs to be engraved].

3. Use a UV printer for coloring.

The carved tile background looks more embossed, three-dimensional, and more realistic. It is recommended to choose a thicker brick for carved tiles, and the carving depth should not be too deep, otherwise the UV printer will not be able to color.

The primary issue of choosing a UV flatbed printer should be considered from factors such as the stability of the printer, the selection of the printhead, the later maintenance cost (the price of replacing the printhead), and after-sales service.

Take the nozzle as an example, the Toshiba CE4 nozzle is only about 6,000, the life span of Toshiba is 24-36 months, and the G5 nozzle of science and technology is more than 20,000, and the service life is 9-18 months. Toshiba printhead printing speed is faster than Epson's, the accuracy is higher than Ricoh's, Toshiba printhead warranty for two years, which determines whether the cost of the printer will increase in the future use process.