-
Anonymous users2024-01-23Of course, many times we make bathroom bath bombs, are used socket electricity, bath bombs come with lighting, so small area can not be done separately lighting. If you have to do lighting alone, you can also use an empty open when you take the fire zero on the socket.
-
Anonymous users2024-01-22No, the lighting should be separated from the socket.
-
Anonymous users2024-01-21Generally, don't do this, the gate valve is still separated, and it can be controlled individually. If you must do this, you need to change the gate valve to a larger one to avoid tripping.
In the early stage of hydropower transformation, there must be a detailed construction budget and construction drawings to avoid adding items in the later stage! When signing a contract, it is also necessary to indicate the brand and specifications of construction materials, so as to avoid invisible consumption and cutting corners.
It is definitely feasible, especially in the bathroom, and the water and electricity renovation must not go underground, because it also destroys the waterproof layer and is more likely to have problems.
There are many such cases.
For example, table lamps and floor lamps are not all plugged into sockets. Because the light path does not need to be leaked (only zero live wire), and the socket is a zero three wires of fire ground, as long as your socket is connected to the leakage protection, the two conditions of use are fully met, so the light path can be the same circuit as the socket, but the socket can not be connected to the pure light path (no ground wire). >>>More
Restroom lighting and socket design should not be the same circuit. Lighting and outlets should be separated.
Plumber Hugong: 5 switches and sockets must be installed in the bathroom, which is convenient and practical.