-
Anonymous users2024-01-23Tools required: grinding wheel, wood texture paint, mothproof, non-woven fabric.
1. First of all, use the grinding wheel to polish the surface of the old furniture.
>2. Then, take a jar of wood texture paint, and this paint brush is the effect of the wood texture.
>3. Then find a piece of non-woven fabric, dip it in wood texture paint, and evenly coat it on the old furniture.
>4. After the surface is dry, wipe it again with a dry non-woven fabric.
>5. In this way, the painting is completed, and the effect is shown in the figure below
-
Anonymous users2024-01-22Hong Kong Xuebao replied to your question: How to repaint old furniture? [A:.]
When you don't know the quality of the old paint, the direct use of the new paint will produce a chemical reaction, so that the paint will flower, and may also produce the phenomenon of blistering, the basic method is as follows: first, for the cause of the paint to separate, you can use a separating agent or paint stripper, the separating agent is about 50 yuan, directly brush to the original paint surface to produce the separation between the new paint and the old paint. The use of paint stripper will be about ten yuan, but to do a good job of protection, the smell is quite large, and the paint stripping is not a kind of paint is gone, but the softening of the surface paint film. Second, if the paint stripper is used to polish the zero abrasive cloth for about ten hours, do not use very hard just to knock off the paint film Third, at this time, you can check whether the original wooden products have holes or cracks, you can use putty for leveling, the estimated cost is forty yuan, but pay attention to the shrinkage joints of the door and the window do not fill the putty ash, otherwise it is easy to diffuse the wood Fourth, you can do new paint at this time, simply put, two points:
One is to re-polish it with water sandpaper and then paint it. One is to plaster it with putty plaster, and then apply paint after sanding. **I suggest you take a look at the essence of the forum and the problem will be solved.
Check out the original post" to adopt.
Old furniture needs to be smoothed with a grinding wheel and then painted, here are the specific steps: >>>More
When the quality of the old paint is not known, the direct use of new paint will produce a chemical reaction, so that the paint will bloom, and it may also produce blistering. >>>More
This is totally fine.
First of all, you need to determine what nature the original paint belongs to. Generally speaking, the commonly used types of paints are: nitro paint, polyester paint. >>>More
Before you don't brush it, see if the paint is flat! If it is uneven, it is recommended to sand it with sandpaper! Then brush again, the first time the paint is a little thinner! Suggestion If you don't have a lot of furniture at home, spraying works best!
1. Mixed oil finishing process: first use coarse sandpaper to polish off the old paint, then scrape the putty, dry it thoroughly with fine sandpaper to polish it flat, brush the primer once, polish, then brush the topcoat several times, then polish, and finally spray the topcoat again. 2. Clear oil finishing process: >>>More