Can you still paint the solid wood floor after waxing

No. There is wax on the surface of the floor, and the paint is very difficult to stick, even if it is forcibly brushed, it is very easy to peel off, which especially affects the appearance and flatness.

The following points need to be paid attention to when painting.

1. First polish off the wax on the surface of the floor, or the previous paint.

2. To level the floor, you can use a floor grinder or manual grinding.

3. If the previous paint is difficult to remove, it can be removed with a chemical remover.

4. For the original scratches, etc., it is necessary to carry out special treatment and further polishing after leveling.

5. If there are punching holes on the floor, you need to use some wooden stuffing to plug them in advance, and then flatten them.

6. When painting paint, you must pay attention to wearing a mask, because the smell of this kind of paint may be harmful to the body.

Paint it straight is definitely not a good idea.

It needs to be sanded first, not only to remove the wax film, but also to level it entirely. Then brush the varnish.

Absolutely not, because the surface of the solid wood has a wear-resistant layer, and the bottom is basically 4 topcoats, so it can't.

First use natural color (original wood grain) floor paint putty, be sure to use a putty close to the wood color to scrape the pit flat, and then use 350 water sand paper to polish it, clean it up, and then paint it on it, otherwise you must not directly brush the varnish.

In addition, if you don't want to bother, you can wipe it clean with alkyd mixture, gasoline, and finally paint it. But be sure to watch out for open flames

Sanded first, then brushed with varnish.

No, if you really want to beat it, you can wash it.