What are solid wood doors and solid wood composite doors?

The current market concept is very chaotic, and there is no fixed concept in the official at present.

The structure of the solid wood composite door is like this: take a board as far as the middle is the filler (generally a small wooden block, which is better, some keel, some are empty, and some are corrugated), on both sides of the filler is the balance layer (MDF) The outermost is the veneer pasted, and some are pasted with wood grain paper, so that a board should be bonded by 5 layers of different materials, as long as the door is made of such a board, it is called a solid wood composite door;

For the naming of solid wood doors is very messy, in the past, as long as it was directly processed by wood (only change the size and shape of the wood without changing its internal structure, each board is real wood, not like the board of the composite door is made of several layers of east and east bonding) is a solid wood door, and now with people's enthusiasm for solid wood, some dealers and manufacturers in order to pursue profits and secretly change the concept, as long as the inside and outside are wood, just like the composite door, the difference is that the filler in the middle of the door is a small wooden block, The outside is made of 3 layers of veneer, as long as the door is processed from such a board, it is called a solid wood door, but it is also veneered, and the price of such a solid wood door is determined by the middle filler and the quality of the outermost veneer.

Log doors are those doors that are processed directly from wood, and each board is a separate piece of wood, which is not treated with veneer, which is the kind that was previously called solid wood doors; Now there is also a kind of door, the board is made of a small piece of wood finger joint, the outside does not need to be veneered, some call it a solid wood door, some call it a log door, the name is different.

From the point of view of health, beauty and practicality, the log door is the best, but the price is high, the solid wood door of the finger joint board is second only to the log door, the price is lower than the log door, the price of the solid wood door is moderate, because the glue will be used to paste the skin, so the environmental protection is not as good as the first two, and the solid wood composite door grade is much lower, whether it is the appearance, the texture is not as good as the former, but the price is also very low. Log door, solid wood door deformation and cracking probability is large, choose a big brand, good reputation, relatively speaking, the solid wood door of the finger joint material is more stable, and the solid wood door with the best stability, the appearance is obviously not as good as the first two, and the solid wood composite door does not have a cracking problem, but it is afraid of moisture, and the skin will rise and fall off when damp and so on. If conditions permit, it is better to choose a solid wood door or a log door, and the above is for reference only.

Asia-Pacific Doors and Windows Network will answer for you.

Solid wood door refers to the material of making wooden door is taken from the forest of natural logs or solid wood laminated timber (also known as solid wood finger joint material or solid wood tooth joint material), after drying, blanking, planing, tenoning, drilling, high-speed milling, assembly, grinding, painting and other processes of scientific processing.

The core of the solid wood composite door is mostly made of pine, fir or imported filling materials, etc., and the MDF and solid wood veneer are pasted on the outside, which are made after high temperature hot pressing, and the edges are sealed with solid wood lines. Generally, the core of the high-grade solid wood composite door is mostly high-quality white pine, and the surface is solid wood veneer. Due to the small density, light weight, and easy to control the moisture content of white pine, the weight of the finished door is lighter, and it is not easy to deform and crack.

In addition, the solid wood composite door also has the characteristics of heat preservation, impact resistance, flame retardant, etc., and the sound insulation effect is basically the same as that of the solid wood door.

Solid wood composite door is the most common type of door in wooden doors, and it is also the most cost-effective kind of wooden door. The core of the solid wood composite door is mostly made of pine, fir or imported filling materials, etc., and the MDF and solid wood veneer are pasted on the outside, which are made after high temperature hot pressing, and the edges are sealed with solid wood lines. Generally, the core of the high-grade solid wood composite door is mostly high-quality white pine, and the surface is solid wood veneer.

Due to the small density, light weight, and easy to control the moisture content of white pine, the weight of the finished door is lighter, and it is not easy to deform and crack. In addition, the solid wood composite door also has the characteristics of heat preservation, impact resistance, flame retardant, etc., and the sound insulation effect is basically the same as that of the solid wood door. If you want to buy solid wood composite doors, you can compare a few more, such as Meixin, Mengtian, Panpan, etc. are very good wooden doors, you can go to their stores to understand.

Solid wood and solid wood composite doors.

One. Solid wood doors.

According to the material, there are two kinds of grafts and logs. The performance of the grafting is relatively stable, not easy to deform, and it is directly formed after sawing solid wood. The moisture content of the purchase point is less than 12%, the processing is fine, there is no obvious mortise, no burrs, the processing size is accurate, and the closing lines are complete.

It is characterized by its calm and elegant, but it is relatively expensive. The relative stability of logs is poor and it is easy to deform.

Two. Solid wood composite doors.

It is characterized by the fact that the door frame is made of high-quality solid wood, and all are heat-treated, unchanged, and do not crack; The façade is made of decorative panels glued.

1) Parquet decoration door façade veneer parquet technology is advanced, using imported high-strength integrated glue bonding. The door leaf is filled with honeycomb sound insulation panel, which has a good sound insulation effect;

2) The solid core decorative door leaf is filled with thermal insulation and flame retardant materials, which are processed. It can be set up with small pieces of glass, rich in shape, and similar in performance to solid wood doors, but the price is much cheaper than solid wood doors, and it is fireproof and flame retardant;

3) The inner part of the plywood decorative door leaf is the keel, and the outer veneer is mainly made of plywood. The advantage is light weight and low price.

Oh my God! I'm a layman who knows it!!

The core of the solid wood composite door is mostly made of pine, fir or imported filling materials, etc., and the MDF and solid wood veneer are pasted on the outside, which are made after high temperature hot pressing, and the edges are sealed with solid wood lines. Generally, the core of the high-grade solid wood composite door is mostly high-quality white pine, and the surface is solid wood veneer. Due to the small density, light weight, and easy to control the moisture content of white pine, the weight of the finished door is lighter, and it is not easy to deform and crack.

In addition, the solid wood composite door also has the characteristics of heat preservation, impact resistance, flame retardant, etc., and the sound insulation effect is basically the same as that of the solid wood door.

Due to the variety of shapes and styles of solid wood composite doors, or exquisite European carvings, or Chinese classical parquet of various colors, or fashionable and modern, different decorative styles of doors give consumers a broad space to choose, so they are also called solid wood modeling doors. High-grade solid wood composite doors not only have the characteristics of smooth feel and soft color, but also are very environmentally friendly and durable.

Compared with the expensive cost of pure solid wood doors, the price of solid wood composite doors is generally about 1200-2300 yuan. For example, the higher-grade rosewood door is about 2,300 yuan a door; Medium and high-end walnut, cherry, sapele and other wooden doors cost 1,900 yuan each.

In addition, veneer and stickers are more common in the finishing materials of modern wooden doors. The price of veneer doors is relatively high because of its natural texture, beauty and strong impact resistance; The sticker wooden door is also called the "grain wooden door", because of the low price, it is a more popular product, the disadvantage is that it is easier to break, and afraid of water.

To put it simply, solid wood doors are natural, and composite doors are man-made!

Just like a woman's breasts, there are natural and man-made!

Solid wood composite doors have the characteristics of smooth feel and soft color, it is very environmentally friendly, strong and durable.

Solid wood doors refer to wood without any composite materials (there are industrial boards such as particle board, fiberboard, and plywood). Solid wood plywood refers to the mixture of composite materials (such as particle board, fiberboard, plywood and other industrial boards) and solid wood boards. (Now there are also plastic panels together with the solid wood composite door).