-
Anonymous users2024-01-23The angle grinder comes in handy, first 40 mesh and then 180 mesh leveling or hand planing, and then, 8,000 or 10,000, wood wax oil, cotton bath towels or bed sheets oil polishing.
-
Anonymous users2024-01-22Let's plane with a table.
When the quality of the old paint is not known, the direct use of new paint will produce a chemical reaction, so that the paint will bloom, and it may also produce blistering. >>>More
It depends on what kind of color you like. Use whichever color you like.
The clear oil is transparent, mainly to express the beauty of the natural grain of the wood, so the color is basically close to the natural color of wood. The oil mixing mainly shows the color of the paint itself and the shadow change of the wood itself, and the requirements for wood are not high, such as plywood, cork, and MDF. Therefore, if you want to use bright colors, you need to mix oil
Composite board, it is not good to use varnish, just cover it with solid paint, polish it with fine sand before brushing, and it is best to polish it with Bona's pretreatment agent, (enhance adhesion). Paint can consider the problem of environmental protection, cheap is difficult to be good, oil-based paint is certainly not environmentally friendly, but there are many problems with the adhesion of water-based paint, it is recommended to use W5000.
1. Mixed oil finishing process: first use coarse sandpaper to polish off the old paint, then scrape the putty, dry it thoroughly with fine sandpaper to polish it flat, brush the primer once, polish, then brush the topcoat several times, then polish, and finally spray the topcoat again. 2. Clear oil finishing process: >>>More