-
Anonymous users2024-01-231.The kitchen is long and narrow, the original light is installed in the middle, and the worktop is in the back, which is not very convenient for backlighting when cutting vegetables at night.
Remedy: A cabinet light can be added under the wall cabinet. Wire from the ceiling and under the cabinet, otherwise you can only consider connecting the open wire.
Prevention: In the early stage of design, it is necessary to fully consider whether the light source is sufficient.
2.The lighting was installed without considering the placement of the dining table, resulting in the lamp not being in the middle of the dining table.
Remedy: Consider changing the center point of the light source by changing the shape of the dining table or lamp, such as using a long lamp or a round dining table.
Prevention: After completing the floor plan, the designer needs to find the center point of the dining table through actual measurement to avoid this situation.
3.In the winter, I have to get up and turn off the lights when I lie in bed.
Remedy: See if the lamp can be equipped with a remote control, or put a desk lamp at the head of the bed, do not need to turn on the main lamp, and turn off the desk lamp directly when sleeping.
Prevention: When designing the circuit, it is set up as a dual-control, and there is a switch next to the door
The large washing area can not only complete the draining of vegetables and fruits, but also help the washing area temporarily store cups, plates and wine utensils. The kitchen washing area is composed of a sink, and the washing area is reasonably planned with other functional areas of the kitchen, so that the space is harmonious and smooth, and the operation is convenient. >>>More
1. The installation of the internal integrated ceiling lamp must be selected in a good position; There is good ventilation and lighting environment, and the condition of the wall itself should be checked to prevent the wall peeling phenomenon during the installation process. The ceiling is a must be inspected before installation, and these are the best operating platforms that can be used during construction and installation. Jiuzheng Home Network believes that light steel skeletons are generally used to make a protective measure in the ceiling. >>>More
Make shelves without changing the window structure. Punch holes in the cement parts above and below the window (the width is determined according to the position of the range hood hanging hole), install iron bars or stainless steel bars with expansion bolts (vertical installation, one on the left and one on the left and right), punch holes at the appropriate height of the iron bars, and install the range hood hook, so that the range hood can be hung. The width and thickness of the iron bar or stainless steel bar determines the stability of the range hood, and it is recommended to be 70mm wide and 5mm thick or more (the higher the window, the longer the iron bar is required, the width and thickness must also be increased, and the thickened and widened iron bar must be used above the height). >>>More
The sink is responsible for cleaning the kitchen, and its location should not be overlooked, and the reasonable layout is to leave at least 40cm of side distance between the sink and the wall, so that there is room for dishes and kitchenware that need to be brushed. Otherwise, the narrow corner position will not only make it impossible to place the dishes and kitchenware to be washed, but will also splash dirty water and oil stains on the wall tiles during washing. This small link should not be underestimated. >>>More
Strictly speaking, a good design lamp is hung in the middle of the ceiling, it must be in the middle of the TV background wall, but there will be some errors, but it cannot deviate too far from the center of the TV background wall, and the effect will be ugly.