How to cut off the baseboard on the side of the doorway when installing interior doors

Updated on Inner door 2024-01-27
16 answers
  1. Anonymous users2024-01-23

    This should ask the master who installs the wooden door to remove the baseboard first, and after the door cover is all installed, the baseboard will be cut according to the specific size of the site, and the installation will be completed.

  2. Anonymous users2024-01-22

    Interior doors have door frames, which are generally installed first and then baseboards; Its practical angle grinding drill can cut off the baseboard. -pan

  3. Anonymous users2024-01-21

    General modern décor . The baseboards are all attached to the wall, and they are as flat as the wall. Since you've pasted it, you can only fasten it up to a good size, and then put it on when you're well.

  4. Anonymous users2024-01-20

    Portable cutters are not easy to cut. Only cut half of it, and the other half can be washed with a flat hairpin, or flushed out, and the door is pasted.

  5. Anonymous users2024-01-19

    The baseboard should be removed first, and after the door cover is all installed, the baseboard should be cut according to the specific size of the site, and then installed. There's no other way than to move the door up, unless you don't care about the aesthetics.

  6. Anonymous users2024-01-18

    Use an electric cutter to cut the edges, and then use a hammer to knock off the excised part, if it is not good to knock, you can use a cutter to cut it into small pieces.

  7. Anonymous users2024-01-17

    The ideal state is, of course, to buckle the baseboard, measure the size with a toothless saw or angle grinder, and then live some cement or glue with marble... If you don't remove it, you won't be able to cut it directly, and it will hurt the floor tiles.

  8. Anonymous users2024-01-16

    Who gave you the floor tiles? When you put the bricks, you should keep all the places at the door.

  9. Anonymous users2024-01-15

    It is best to install the door frame or door cover before attaching the skirting next to it.

  10. Anonymous users2024-01-14

    Cut directly with a hand-held cutter! Note: Be bold and careful, hold it firmly! Hope it helps!

  11. Anonymous users2024-01-13

    You can use a glass knife to scratch, and then it will break, it is best to ask an experienced master, otherwise it will not be good to get it yourself.

    It is also possible to use a cutting machine. Angle is a problem, though.

  12. Anonymous users2024-01-12

    This one needs to be found to install a baseboard to deal with the next side.

  13. Anonymous users2024-01-11

    Generally, the mouthwash bought from the supermarket is non-drug, and the main waste is flavor, surfactant, fluoride, strontium chloride, alcohol and water, etc., and a small amount of swallowing will not cause harm to the body. Even mouthwashes containing medicated ingredients are fine to swallow in small amounts.

    The focus of personal oral health care is plaque control, brushing and flossing are the basic means of control, but it cannot completely remove plaque, and mouthwash, as a supplementary method, has its inevitability and effectiveness. But it can't be over-relied on, or even completely relied on.

    Therefore, babies who often use mouthwash to clean their mouths must pay attention to these methods of use, and cannot use them blindly

  14. Anonymous users2024-01-10

    With a handheld cutter will do,

  15. Anonymous users2024-01-09

    1. Indoor door positioning and pay-off.

    2. Use a small cutter to cut the baseboard.

    3. Repair and polish the baseboard.

    4. Interior door installation.

  16. Anonymous users2024-01-08

    Flat-mouthed screwdriver, if you can't do it, you know the master.

Related questions
4 answers2024-01-27

The floor, walls, and ceilings are all masonry and lacquer workers and then install interior doors, and the doors are directly assembled after customization, saving money. >>>More

7 answers2024-01-27

The previous door was made of carpentry, the quality was good, but not beautiful, I want to look good.

7 answers2024-01-27

1. To choose a door that is consistent with your own home decoration style, you should pay attention to the decoration style when buying interior doors, so as to achieve the best decorative effect. >>>More

6 answers2024-01-27

1. What kind of door is better for decoration?

1. Molded door. The appearance is beautiful, and the price of each set is only a few hundred yuan to 1,000 yuan, which is not easy to deform. It is made of two sheets of fiberboard cold-pressed, and because the fiberboard contains formaldehyde, it is difficult to meet the environmental protection standard. >>>More

1 answers2024-01-27

That is, of course, Xin Liufu, the solid wood door style highlights the simple European style, rich styles, suitable for the needs of a variety of different decoration styles, there is always one for you.