-
Anonymous users2024-01-231. Before using tile grout, the tile gaps should be cleaned to remove dust, oil stains and other pollutants. At the same time, it is also necessary to remove loose tile adhesive between the gaps in the tiles.
2. Stirring uses a low-speed electric drill with suitable stirring blades for mechanical stirring. Add the powder to an appropriate amount of water and start stirring until it is homogeneous and lumpy. The mixture is allowed to stand for 5minStir slightly and use.
-
Anonymous users2024-01-22It must be that the water in your house is blocked, and the decoration materials he built may have fallen. If the sewer is blocked, it will go up, and you ask them to find a professional maintenance person to unclog the sewer.
-
Anonymous users2024-01-21Different floor tiles have different pasting methods, including direct seamless pasting and seam hooking.
-
Anonymous users2024-01-20In this case, it may be that you are not a professional, you are not very clear about the design under the bathroom, and you are not clear about the direction below, you should ask a professional floor repairer to deal with it for you, and the professional understands the direction of the bathroom, just deal with it.
-
Anonymous users2024-01-19This doesn't work, how can you do other things without hooks, do the same, let it be done.
-
Anonymous users2024-01-18Then this construction house is very irresponsible, you can ask them to endure it and ask what to do when you see it?
The time of hooking the joint is best after 48 hours after laying the wall and floor tiles, because under normal circumstances, the cement mortar will begin to solidify after 2 hours, and you can walk around on it after 48 hours, but it takes a few days to completely dry, so you can hook the joint on it after 2 days.
Buy some new cow yuan caulk back and make up for it yourself! It must be repaired for at least 24 hours before touching the water, and the brick must be washed before repairing, and then let it air dry and be repaired immediately.
Generally, 15mm and 20mm will be added.
Before pasting tiles, you need to check the verticality and flatness of the wall, if the verticality and flatness are not good enough, then you need to make adjustments in advance to keep the wall as smooth as possible. In this way, the thickness of the adhesive behind the tile can be uniform, which is good for reducing the amount of adhesive used and improving ergonomics. >>>More
If the leakage is more serious, the best way to deal with it is also a once and for all method, which is to dismantle it and redo it waterproof. Don't know what waterproofing material you use. It is recommended to use a more well-known waterproof material after this dismantling. >>>More
White tiles with black sewing agent is the best match, black and white with always classic, white tiles are still more common in home decoration, white tiles are basically wall tiles, so the wall tiles are white and slippery, how ugly? >>>More