-
Anonymous users2024-01-23Blue is the ground wire (can be left unwired), and yellow is the neutral wire. Whether the blue and yellow lines are reversed! The light is connected to the yellow red line!
Hello: Sockets can be installed, note that sockets must have a splashproof box (waterproof plastic cover).
Gyplight for kitchen and bathroom ceilings is OK. However, if the bathroom and kitchen need to use gypsum board ceilings, waterproof gypsum board must be selected. Because ordinary gypsum board ceiling products are most afraid of moisture, the use effect of home decoration and bathroom is not good, and when used in kitchen ceilings, perennial smoke is easy to yellow. >>>More
Aerated concrete blocks should not be used, especially for walls below 1500mm. Because of the hygroscopic wall of aerated concrete blocks, and the strength is softened when exposed to water. It is also easy to breed germs and microorganisms.
If the height design of the bathroom socket is unreasonable, it will cause a lot of trouble, let's take a look at it today, the height of the bathroom socket is standardized. The bathroom uses a lot of water, so in the installation of switches and sockets, it is necessary to ensure the safety of electricity. The height of the mirror lamp is generally 1950mm, the socket and the switch should be level 1350mm, the washing machine socket is generally 1350mm, the socket behind the toilet is generally 350mm, and the electric water heater socket is 1800-2000mm, and the position of the electric water heater should be considered.
Hehe, the specification uses a "suitable".
I think: since the bathroom is designed without an electric water heater, no bath bomb, only a socket for the hair dryer, there is no need to set up a separate socket circuit in the bathroom, you can use the same circuit with the living room, but it is recommended that you use the same circuit with the kitchen socket. >>>More