-
Anonymous users2024-01-23Generally speaking, the calculation of the ceiling area is suitable for the falling ceiling (that is, the ceiling above the second level or the modeling ceiling), and the area obtained by the circumference (extension meter) * (length of the vertical plane + horizontal plane) is the area.
Usually in the ceiling decoration budget, it can be calculated according to the projected area, or it can be calculated according to the area. If it is a straight line reflective roof, it is calculated according to the area, the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) plus and then multiplied by the total length to get the area of the ceiling, for example, the width of the ceiling is 40cm, 20cm down from the roof, the total length is 4m, then the area should be 60cmX4m = squared.
For example, a roof area of 20 square meters, 40 cm of dark light trough around the periphery, another herringbone attic stone draft plate capped, the flat top surface is also 20 square meters, but the secondary floating ceiling, how to calculate the area and projection area of the house ceiling?
The calculation of the area of the ceiling is actually the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
-
Anonymous users2024-01-22It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
-
Anonymous users2024-01-21The area means the area where the sealing plate is located.
For example, a 600mm wide ceiling with a light trough falls 200mm from the top surface and the edge of the light trough is 100mm. The indoor circumference is 5000mmX3500mm
The area of the ceiling is: (600mm+200mm+100mm)X [(5000mm+3500mm-1200mm)X2 sides].
900mmX 14600mm
13140000mm2
Square metre.
-
Anonymous users2024-01-20The problem you encounter is that there has been no standard in the decoration industry!
In theory, the company's algorithm is correct, and some companies are doing the same, but most companies are still calculating the projection area.
Right or wrong depends on how you agreed before.
-
Anonymous users2024-01-19If you have a model, it is flat. It's over.
It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
Calculation method: (length + width) 2 room height = wall area. >>>More
Rough calculation method: the ground area is 3 The theoretical coating area of the glue paint is two times The number of barrels used. >>>More
The area of each board of 600*600 integrated ceiling is squared.
It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.