-
Anonymous users2024-01-23The space volume of 8 square meters of bathroom is about 8 * 3 = 24 cubic meters, in general, because there is a suspended ceiling, the actual volume is a little smaller, the number of exhaust air per hour of the bathroom is set at 6-10 times, that is to say, 150 air volume - 240 air volume per hour can meet the needs of bathroom exhaust, it is recommended that you install an exhaust fan with an exhaust air volume of 180 cubic meters per hour, and the plastic ceiling pipe exhaust fan of Green Island Wind has a diameter of 100mm, The size of the opening is 280 * 280, 86 yuan a piece, should be very suitable for the use of the bathroom, the noise is not big, the warranty is two years, the exhaust fan has quality problems free of charge for the new machine, with the rest assured, no worries, quiet electromechanical technology can provide you with suggestions for the installation and use of the exhaust fan.
You have to see what your bathroom is used for, what the main purpose is, whether it is just for bathing or whether all the water is hot water; It also depends on the way you supply water, and you can calculate the amount of water you use after you have all of them, and you also need to know how many people you use water, and you have to decide how much air energy you use according to your water consumption.
Ceiling 1500 yuan "integrated ceiling", cabinet 2000 yuan, "middle and upper" wall and floor tiles 5000 yuan hydropower renovation 1500 yuan total: 10000 yuan, this is the most economical, there is a low price of about 8000, or luxury about 25000, hehe it depends on your economy.
According to the data of our experiment, the wind resistance of the bellows is greater than that of the PVC pipe, a 90-degree bend is equal to the static pressure of the 6-meter straight pipe, and it is best to choose a ventilation fan with high static pressure if the floor is high, because the higher the floor, the greater the external static pressure, the worse the ventilation effect.
If it is a commercial house, the position of the washbasin, toilet and shower in the bathroom is fixed, because this involves the problem of drainage pipes (to solve the problem of pipes), these positions can not be changed (the location of these pipes are embedded in the ground of your bathroom, but this part is the roof of your downstairs residents), now the location of the electric water heater is left, I personally recommend putting it in the upper part of the toilet, which saves space in the bathroom and looks more tidy, There is also a tempered glass partition between the toilet and the shower room to achieve dry and wet separation, remember that all the renovation points should ensure that the waterproof layer of the bathroom floor (and the waterproof layer on the surrounding wall has been turned up about 30CM), and the transformation must be carried out above this 30CM.
It is recommended to use a column-type wash basin to save space.