-
Anonymous users2024-01-23Add a circulating pump, that is, there is hot water, if there is no return pipe, you can add a check valve under the basin of the main bathroom, which is very easy to operate.
-
Anonymous users2024-01-22You can go directly to the hot water pipe, but it costs water and gas.
Yes, it can be installed.
What type of water heater to choose, where to put it must be set before the water reform, version of you now the wall and ground right bricks have been completed, if you change the type and location of the water heater, the problem is not small. >>>More
Two bathrooms and one kitchen, it is recommended to buy a gas water heater with a higher number of liters, 16 liters or more. Then add a circulating water system. >>>More
Because the distance is relatively far, there may be some cold water in the pipeline in advance when it is first opened, so there will be cold water, which is not easy to solve, but if it is solved, the pipeline can be installed for circulation. It is to install a circulating pump on the pipeline, and when the water in the pipeline is lower than a certain temperature, the circulating pump starts to circulate once to maintain the water temperature.
Gas water heaters are generally installed in the kitchen, so the best way is to use a gas water heater in the bathroom near the kitchen, and an electric water heater in the bathroom farther away. The advantage of this is that it can improve the use of hot water, reduce the waste caused by too much cold water due to the "long distance", and also improve the convenience of using hot water in another bathroom. Hope to adopt, thank you!
The model of the water heater cannot solve the problem of long distance, and usually a 10L water heater can meet the needs of a family of three. However, due to the long distance, there will be a certain amount of cold water coming out of the pipe at the beginning, which is not solved by the model of the water heater. Therefore, the common practice is: >>>More