Sofa cover making tutorial

1. First of all, you need to prepare some tools, such as cloth, tape measure, stationery clip, ribbon, scissors, pins, etc.;

2. The second is to measure the size of each part of the sofa, and then mark it on the paper;

3. Then according to the measurement size of the sofa, the cloth is rented and cut, and it should be noted that the size of the rock should be greater than the measurement size of the sofa, because the sewing size should be reserved;

4. After that, you can sew the fabric of each part of the cut.

The sofa cover making tutorial is as follows:

Prepare a large piece of non-woven fabric, lay it flat on the sofa, fix the non-woven fabric in place with a pin, and mark the cutting line on it with a pencil. Non-woven fabrics are basically sold in rolls, but it can be stored for a long time, and it is often used in home DIY, so it doesn't matter if you buy more.

> cut it with scissors where the cutting line is marked. Prepare a long strip of red cloth and thicker rope, wrap the rope with the strip of cloth, and sew it up. It is important to wrap the rope tightly before sewing.

Stitching of red polka dot fabric and lace. It is worth noting that the rope wrapped in red cloth is the position of the edge of the sofa.

Sew the cut non-woven fabric and the sewn lace dot fabric together, and cut some small lace at the corner to beautify it. In this way, the side of the sofa cover is completed, and the side, front and back of the other sock can be completed in the same steps as above.

> remember to sew the lace with the fabric that has been sewn, the lace does not need to be repeated! Sew each part together so that the rudiments of the fabric cover come out, and at the end you can decorate it with a pleated lace from the leftover red strips of cloth.

There are two main types of sofas: classical and modern. Guess the classical sofa generally adopts some traditional modeling elements and uses the traditional process structure, so the structure is more complex. The exposed parts of this type of sofa are often carved, inlayed, depicted, painted, etc.

Here are two ways to do it, you can choose the one that suits you. Choose the color of the fabric, first of all, the two work together to cover the fabric in different parts, according to the arc of each part of the sofa, reserve the edge for sewing (you can leave more points to prevent the cutting is not in place, you can sew it in if you leave more, and the sofa cover that you will tear out if you leave less), cut out various shapes of fabric one part and one part, and finally sew them together. I don't know what your sofa style is, you need to cut out the back piece, the backrest piece, the chair piece, the front piece (you can also add a ruffle under the front piece), two side pieces (if there are armrests, you can cut a few more pieces), the cutting of the two side pieces is the most important, you must cut it according to the curved shape of the sofa, pay attention to the position of the top of both sides of the backrest to be discounted, and the specific length depends on the curvature of the sofa.

Then sew the vertical sewing first, and then sew two sides, so that the sewing of the sofa cover is more beautiful, if it is made of flower cloth, plaid cloth should also pay attention to the good pattern. Prepare tools: a little cloth, a tape measure, a stationery clip, a ribbon, scissors, and pins.

Production process: 1Measure the width of the sofa first.

Measure the length of the backrest from the front legs and cushions + the length of the backrest behind + the width required to tuck into the cushion. 2.Re-measure the length of the desired sofa sheet:

Measure the length of the armrests (from the ground on the outside of the armrests to the inside cushions)*2 + the length of the middle cushion + the width required to tuck into the cushion. 3.Spread the appropriate length of cloth on the sofa.

Generally, the cloth required for a single sofa is about: length 230cm, width 235cm; The cloth required for the two-seater sofa is about: length 300cm, width 235cm; The cloth required for the three-seater sofa is about:

It is 470 cm long and 35 cm wide. 4.According to the shape of the sofa, the cloth is stuffed into the seat seam, and at this time, stationery clips, long rulers, plastic pipes, etc. can be stuffed into the seat seam to fix and prevent sliding loose.

6.Bow or other ornaments can be pinned to the pins to add beauty.