-
Anonymous users2024-01-23It's good to make your own septic well, you can search for the septic well drawings and you can search for the drawings. There are also finished septic wells that can be used, just find a seller and ask how to install them. It's good to pay attention to the depth of the burial, if it weren't for the fact that there is no problem of soil thawing in the north, as long as it is buried lower than the ground, if there is a possibility of freezing, it would be good to bury it below 1.5 meters, but I really don't remember what the norm is.
You can also look it up for yourself. It's okay to buy the finished product and ask the seller. If you do it yourself, in fact, it is enough to connect several wells in a row at different heights.
The first well to the last well connected by the sewage is higher than the other, and three to four wells are enough.
Disassemble or replace the leaking pipe, and connect it directly after applying it with PVC special glue, and using raw material tape and black tape can not prevent water leakage. If the leakage is not very serious, it is okay to apply glass glue on the outside of the pipe or in the leaky area, but the premise is that when applying glass glue, the tube must be dry and kept for at least 12 hours.
If the upstairs is renovated and the house is not inhabited, and the sewer pipe is leaking, contact the property for repair.
It's good to get some glass glue on it, and be sure to clean it up.
Experiment with cologne-fine seam glue. There must be no water during the drying process, otherwise it will not dry. After drying, it is completely transparent, and the thickness of 2 mm is fine.
First of all, it is necessary to determine the cause of the water leak >>>More