How to hang the ceiling of the restaurant?

Restaurant ceiling installation process.

1. Familiar with the drawings and construct according to the drawings. Use a horizontal tube to copy out the horizontal line, and pop up the baseline line with the ink line. For partial ceiling rooms, if the original ceiling is not horizontal, the ceiling is made according to the level or along the original ceiling, which should be determined by the customer after soliciting the opinions of the designer.

2. The arc top surface should be staked out on the ground first, and the top can only be topped after it is confirmed to ensure smooth lines.

3 The main reinforcement of the glass ceiling of the restaurant is not less than 3 5 wooden keel, the spacing is 8-1, and 1 8 steel must be used to expand and fix, about 1O cm dosage one. The steel expansion should be hit in the prefabricated plate seam as much as possible, and the steel expansion nut should be pressed with the wooden keel.

4. Attention should be paid to the position of the lamps and lanterns in the wooden keel grille, there shall be no wooden keel at the opening of the downlight, the glass ceiling and ceiling lamp of the dining room should be reinforced separately, and the main lamp in the living room should be expanded and fixed with steel. Light lamps and lanterns can be hung on the main keel, and lamps or ceiling fans weighing more than 3 kg shall not be connected with the ceiling keel, and a hook shall be set up.

5. Before the use of gypsum board, the line must be broken into blocks, and the adjacent board should be seamed 3 when sealing the boardL, fixed with special screws, sink into the drywall. 5-1?

L, the nail pitch is 15-17?L。The fixation should be fixed from the middle of the board to the four sides, and multiple points should not be operated at the same time.

There must be a keel at the junction of the plate joints.

6. Before sealing the board, the line must be broken into blocks, ensure that the nails are nailed to the wooden keel, and be fixed with U416 or U419 yard nails, the nail spacing is 8-15, and the nail holes are coated with anti-rust paint. In the case of latex paint, it must be rolled over with alkyd varnish to prevent the laminate from turning over.

7. When using aluminum gusset and paint gusset, you should understand the specifications of the gusset, and purchase it reasonably according to the size of the site. Bathroom ceilings must also be expanded with steel and painted with fireproof paint, and kitchen and bathroom ceilings should be made as high as possible.

8. When sealing the board, pay attention to the lamp line dragged out of the top surface, and the downlight position should be determined by the line on the cover panel according to the construction drawing, and the line head should be dragged out.

9. The total height of the dark light belt of the glass ceiling of the restaurant is generally 12-2, and all the dark light belts should be double-layer silver rain brand neon tubes, and the front baffle of the dark light belt should use nine centiboard or double-layer five-layer board or woodworking board, and the rear baffle should use five-layer board. The panel ceiling should be made of a wooden keel base first, sealed with a layer of five-layer board, and then sealed with a panel.

To put it simply, make a square or round strip light.

The style of the dining room ceiling.

1. Flat type.

Flat ceiling refers to the surface without any shape and level, the top structure is flat, concise, neat and generous, and the material is more economical than other ceiling forms, which is suitable for ceiling decoration of various rooms. It is often spliced with various types of decorative plates, and can also be brushed, sprayed, and pasted with wallpaper, wall covering, etc. (Gypsum board splicing is recommended for brushing latex paint, which is easy to deal with seam cracking) Splicing with wooden boards should be strictly treated at the interface, and must be treated with glue or epoxy resin.

2. Concave and convex type.

Usually called modeling top).

Concave-convex ceiling refers to a form of ceiling with concave or convex structure treatment on the surface, which is complex and varied, with a strong sense of layer, and is suitable for hall, foyer, restaurant, and other top decoration. It is often used in conjunction with lamps (chandeliers, ceiling lights, downlights, spotlights, etc.).

It's better to make a prototype or walk the side with an arc, and the restaurant wants to be harmonious and warm, with built-in light strips, and warm colors.

Personally, I think it's best to use an arc to walk the side, keep the original shape, and hang a chandelier at the end, which is very feeling.