The kitchen cabinet panel in the kitchen is better to paint or UV board

Updated on Kitchen 2024-01-27
2 answers
  1. Anonymous users2024-01-23

    The different materials of the kitchen cabinet door lead to a huge price difference, and each has its own advantages, so you should choose carefully according to your own needs.

    It is a sheet whose surface is protected by UV treatment. That is, ultraviolet light-curing paint, also known as light-initiated coating. The plate formed by passing on the particleboard and other boards, and then drying the plates, because of its easy processing, can realize industrial production, bright color, wear resistance, strong chemical resistance, long service life, high requirements for mechanical equipment and process technology, and has the characteristics of moisture resistance and deformation

    The primer is made of solvent-free 4E green high-grade paint, which is non-volatile, non-toxic and environmentally friendly; After curing, it has an ideal antibacterial effect.

    The base material is that the surface is baked at high temperature by six spray baking imported paint (three bottoms, two sides, and one light). The "baking paint" currently used only illustrates one process, that is, the paint is sprayed and then heated and dried in the drying room to treat the substrate door panel. It is characterized by bright color and easy modeling, strong visual impact, very beautiful and fashionable and excellent waterproof performance, strong anti-fouling ability, and easy to clean.

    The disadvantage is that the process level is high and the scrap rate is high, so the price remains high; When using, it should also be carefully cared for, afraid of bumps and scratches, once it is damaged, it is difficult to repair, and it should be replaced as a whole; Kitchens with a lot of oil smoke are prone to color differences.

  2. Anonymous users2024-01-22

    It mainly depends on the overall style of your home decoration, the modern minimalist style can use UV paint board, and the simple European style can use the blister film tape shape of the board. Each material has advantages and disadvantages, UV lacquered panels are bright, the surface hardness is high, the door panels are flat, and the kitchen is simple and elegant, but the moisture-proof performance is poor. The blister film pressure plate has many colors and textures, and the door panel can be made of complex shapes, with the style of decoration, the overall effect is good, warm and retro, and it is also a relatively mature material.

Related questions
6 answers2024-01-27

Double veneer is the old point of practice, paint is a new point, my personal opinion is, or choose a double panel, its advantage is, 1 you save the silver first, 2 is that it scrubs better to scratch, more scratch-resistant, paint is more good-looking, but the silver is gone, now many manufacturers are that this thing, and the paint is not scratch-resistant, if you want to pick a cabinet, or pay attention to the hardware, this is the key to your cabinet, now the larger building materials city to buy the cabinet, the plate generally does not dare to use too inferior.

2 answers2024-01-27

Paint-free doors are only used in hotels, no one chooses at home, environmental protection is also empty words, all with glue will be environmentally friendly, in addition to the cheap price is not as good as the paint. Paint-free due to the surface sticker, so the internal wood is worse than the paint, and the paint wood is too poor to do, so it is recommended that the hotel (save money) choose the paint-free door, and the household must choose the paint door

5 answers2024-01-27

Solid wood board is good, solid wood board is durable, natural texture, most of them have the unique aroma of natural wood, have good moisture absorption and air permeability, are beneficial to human health, do not cause environmental pollution, is the production of high-end furniture, doors, windows, solid wood carving and other high-quality wood for house decoration. Solid wood panels made of special materials (e.g. beech) are also ideal for the manufacture of gun butts and precision instruments. >>>More

1 answers2024-01-27

The painting is good. 1. The bottom plate of the paint-free board is made of wood minced and glued at high temperature, pressed into one, and glued with glue on top and then glued to a piece of skin. >>>More

1 answers2024-01-27

The lacquer door is better, and the solid wood lacquer door has the advantages. >>>More