How to install a door suction on the security door?

First, the general anti-theft door is not recommended to install a door stopper, one security door does not need to be opened often, and the other is that the installation of a door stopper on the security door is not practical.

Second, there are three major elements that must be taken into account when purchasing a door stopper, namely brand, material and applicability

1. Brand: Nowadays, there are countless brands about door suction in the building materials market, so it is inevitable that there will be entanglement in brand selection. When choosing, it is best to choose products with high reputation, which at least have a brand guarantee, and do not buy three-no products.

2. Material: The best choice of door suctor material is stainless steel, because the stainless steel door suctor has the characteristics of being durable and not easy to deform, and when choosing, we should also pay attention to the shape characteristics of the door suctor and the production process lamp.

3. Applicability: The door suction is mainly divided into two kinds of wall suction and ground suction, which can be selected according to the situation at home, but the wall suction will affect the baseboard when it is installed, and the ground suction should be selected at this time.

Third, the installation of the door stopper:

The door suction is divided into wall suction and floor suction, so the installation environment must be taken into account when installing.

1. Test whether the position of the door suction and the door is appropriate, and it is best to repeatedly test and compare;

2. After the position of the door suction is decided, use a pencil to locate the door, floor tile or wall;

3. The next work is a large electric drill, drilling the installation hole of the door suction on the ground or wall;

4. Install the fixed end of the door sucker, the fixed end needs to be tightened before installation, and then use the supplied inner angle wrench to fix and screw it on the ground or wall;

5. If the fixed door suction is on the ground, it is a fine job, and it is necessary to confirm the position, punching, and assembly procedures after the ground installation of the fixed end, and tighten the screws on the fixed end with the attached inner corner gadget, and the door suction will be automatically installed;

6. It is useless to install the fixed end of the door sucker, and the same should be installed on the door, and it is good to find the accurate position on the door as long as it is tightened with screws;

7. After installation, it is necessary to fine-tune, rotate the angle of the door suction to make it fit all the door suction at the end of the door, and finally tighten the screws thoroughly.

> Note: Invasion and deletion.

Installation of door suction: The door suction is divided into wall suction and ground suction, so the installation environment must be taken into account when installing. 1. Test whether the position of the door suction and the door is appropriate, and it is best to repeatedly test and compare; 2. After the position of the door suction is decided, use a pencil to locate the door, floor tile or wall; 3. The next work is a large electric drill, drilling the installation hole of the door suction on the ground or wall; 4. Install the fixed end of the door sucker, the fixed end needs to be tightened before installation, and then use the supplied inner angle wrench to fix and screw it on the ground or wall; 5. If the fixed door suction is on the ground, it is a fine job, and it is necessary to confirm the position, punching, and assembly procedures after the ground installation of the fixed end, and tighten the screws on the fixed end with the attached inner corner gadget, and the door suction will be automatically installed; 6. It is useless to install the fixed end of the door sucker, and the same should be installed on the door, and it is good to find the accurate position on the door as long as it is tightened with screws; 7. After installation, it is necessary to fine-tune, rotate the angle of the door suction to make it fit all the door suction at the end of the door, and finally tighten the screws thoroughly.

Pro, it is not recommended to install a door stopper for general security doors, one for the security door does not need to be opened often, and for the other part, it is not practical for the installation of a door stopper for the security door. The door suction is divided into wall suction and floor suction, so the installation environment must be taken into account when installing. 1. Test whether the position of the door suction and the door is appropriate, and it is best to repeatedly test and compare; 2. After the position of the door suction is decided, use a pencil to locate the door, floor tile or wall; 3. The next work is a large electric drill, drilling the installation hole of the door suction on the ground or wall; 4. Install the fixed end of the door sucker, the fixed end needs to be tightened before installation, and then use the supplied inner angle wrench to fix and screw it on the ground or wall; 5. If the fixed door suction is on the ground, it is a fine job, and it is necessary to confirm the position, punching, and assembly procedures after the ground installation of the fixed end, and tighten the screws on the fixed end with the attached inner corner gadget, and the door suction will be automatically installed; 6. It is useless to install the fixed end of the door sucker, and the same should be installed on the door, and it is good to find the accurate position on the door as long as it is tightened with screws; 7. After installation, it is necessary to fine-tune, rotate the angle of the door suction to make it fit all the door suction at the end of the door, and finally tighten the screws thoroughly.

First of all, the installation position of the door suction should be determined, the door can be opened to the maximum, and the position of the door and the wall contact is the installation position of the door sucker; After drawing the installation position of the door sucker, use a drill to drill holes, and partially install the ground magnet into the hole, and then use screws to fix it; Open the door, and the place where the door is in contact with the ground magnet is the installation position of the suction plate, which is also fixed with screws.

After punching holes and assembling procedures, it is necessary to install the fixed end on the ground, tighten the screws on the fixed end with the included inner corner gadget, and the door suction will be automatically installed.

If your security door is a wooden door, you can install it according to the normal door suction method.

If your security door is an iron door, it is recommended to install it to suction better.