Several toilets can be installed in the sewer of a bathroom

1. A bathroom can also be installed with one or more toilets, and the construction can be renovated according to needs.

Second, the installation of a few toilets, you need to see how much space is reserved for the pipe to construction, look at the seat of the sewer pipe, there is space from the supervisor, if not, you must increase the toilet 20 cm high, if you don't want to pad up, there is another way, is to punch the hole in the floor, the height that needs to be raised down. Or the ground is perforated to lead to the sewage pipe on the lower floor, and the construction unit can be asked to decide on the spot.

Third, if it is a wall-hung toilet or to go to the pipe, the wall-hung is actually just a simple addition of a vertical water tank, the steel frame water tank is embedded in the wall, and then wrapped with surface materials, the toilet is installed in the later stage, or to consider whether the lead pipe can be increased, and the mandatory requirement of the national standard for the sewer pipe of the toilet is 110 PVC pipe, it is too small to discharge sewage and easy to block, so the sewer pipe of the toilet is generally reserved for civil engineering, and it is very troublesome to change the pipe.

110 only has two parts, if it is three, it is necessary to connect two parts of one point and two parts, four parts to connect three parts of one point and two parts, and so on.

According to this principle, I think that there are at most four toilets, otherwise the general caisson will not be able to fit so many parts of the one-and-two.

You can press as many as you want You won't bet As long as you meet two conditions 1 Downstairs doesn't mind 2 The bathroom is big enough Hehe.

1 is better, 2 are okay, 3 are easy to block, 4 are very bad, and more than 5 are ......