What should I do if the bedroom wall on the opposite side of the bathroom is leaking?

Updated on Bathroom 2024-01-28
10 answers
  1. Anonymous users2024-01-23

    The possibility of water seepage in the pipeline is greater, otherwise it will not seep downstairs, you can find a building materials supplier to help test the pressure, if the pipe is fine, cut off the corresponding wall tiles in the bathroom, paint the waterproof slurry, and then paste the tiles. The room paint putty is completely removed, the waterproof slurry is applied, and then restored.

  2. Anonymous users2024-01-22

    When you decorate, Wei Jinxusheng wall in the veneer brick before the waterproof paint, if not brushed is really troublesome, had to knock off the tiles, re-brush the waterproof, annihilation of the grandson and then paste the brick, generally after this treatment can be done. There are also bedroom walls that should be shoveled off and repainted. Xiang rekindled.

  3. Anonymous users2024-01-21

    Let's see if it is the pipeline leakage, if you can be sure, digging and repairing is a must, in addition to the waterproofing does not play its due role, more information, better advice, free concrete waterproof leakage repair professional and technical advice, to avoid today's repair, tomorrow's leakage, annual repair, annual leakage troubles.

  4. Anonymous users2024-01-20

    The source of the water seepage could not be a problem with the plumbing, but rather shower water or other water pouring onto the wall, as water seeped into the opposite wall and downstairs through the gaps in the tiles.

  5. Anonymous users2024-01-19

    Professionals check whether the toilet base mouth and the drain pipe mouth are not properly connected, if not properly connected, this situation will occur. The next steps are: 1. Find professionals to install toilets and buy qualified products; 2. The floor of the bathroom and the surrounding walls should be turned up to 40cm in height to make a waterproof layer.

    The ground is made of cement mortar to find the slope, make a 5% slope, and the slope is drained. 3. Do a good job of waterproof layer.

  6. Anonymous users2024-01-18

    It must be that the pipe is not connected properly or the pipe is of poor quality and corroded.

  7. Anonymous users2024-01-17

    First, find the cause of the water leak. For example, whether the bathroom is leaking or draining. The upper water is pressurized water, and the lower water is unpressurized water.

    They are repaired in completely different ways. If you turn off the drain and the leakage is relieved or disappears, it means that there is no problem with the drainage. You have to analyze and deduce step by step, and then prescribe the right medicine.

  8. Anonymous users2024-01-16

    It is certain that the bathroom floor waterproofing system is not done well, to solve the fundamental problem to redo the bathroom waterproofing, or find a professional to help you find out the leakage part, and redo the local waterproofing treatment!

  9. Anonymous users2024-01-15

    If there is no problem with the pipeline, it means that the waterproofing is not done, indicating that there is a problem with the construction process, and you can ask the company that helped you decorate it for an explanation.

  10. Anonymous users2024-01-14

    If there is no problem with the plumbing, there is a problem with the decoration of the bathroom

Related questions
8 answers2024-01-28

The methods for water seepage treatment on the bathroom wall include determining the location of the pipe, increasing the height of the waterproof layer, glue plugging and so on. >>>More

7 answers2024-01-28

In this case, the bathroom wall must be re-treated, the waterproof coating is painted 2-3 times, and the uniform height of the horizontal and vertical cross brushing reaches 1800mm.

1 answers2024-01-28

The main reason is that the wall is not waterproof, most of the tile joints have penetrated into the past, you can find the nano permeable waterproofing agent of Youpadun company, paint on the surface, paint twice, you can achieve the effect of waterproofing.

8 answers2024-01-28

The two common causes of water leakage on the bathroom wall are water pipe leakage and waterproof layer leakage. >>>More

6 answers2024-01-28

Decoration must not only care about the shape, the good-looking skin is very simple, and the quality of construction is the last word, such as the waterproofing of the bathroom, the top priority. >>>More