Which kind of wood is good for solid wood flooring and cost effective!

The four commonly used materials of sports wood flooring panels in basketball halls are imported maple, domestic maple, maple birch, and oak.

Imported maple: such as Canadian maple, the wood is compact, the grain is uniform, the polishing is good, and there are occasional light green-gray mineral lines, which are easy to coat. The strength of the wood is moderate, and the quality of the wood is delicate.

Domestic maple: the wood is hard and heavy, has good strength properties, has a particularly high resistance to friction and wear, and also has good resistance to steam bending. It is a wood with little or no heartwood anticorrosive properties, and the heartwood has the permeability of anticorrosive treatment agent, but it is made of wood permeable antiseptic treatment agent.

Maple birch: strong nail grip, good toughness of the material, delicate and soft structure of the material, slightly softer texture than maple; It is elastic, has good processing properties, smooth cutting surfaces, and good paint and gluing properties.

Oak wood: good machinability; Good fixing performance of nails and screws; After dyeing and polishing, a good surface can be obtained; Slow drying and easy to crack and warp; The shrinkage rate is large, and the performance is easy to change. Oak wood is hard and heavy, with medium flexural strength and rigidity, high breaking strength, and excellent resistance to steam bending.

The heartwood is slightly less resistant to corrosion, and the preservative treatment is medium.

1. Floor specifications.

In terms of the stability of the plank, the smaller the size of the floor, the better the resistance to deformation, so it is necessary to choose a shorter, narrower solid wood floor, and minimize the bending, twisting, scooping, shrinking, arching and other phenomena of the solid wood floor. Flooring experts believe that the short one is better than the long one; The narrow one is better than the wide, and it is cheap. But now the market is popular wide plate, the wide plate is more beautiful than the narrow plate, generous, the texture is relaxed, the pattern is complete, but the qualified wide plate must go through strict material selection and quality acceptance.

In general, wide floors should have deformation-resistant grooves on the back, and the grooves should be up to one-third of the thickness of the floor. If it is used for floor heating, it should be thin but not thick, generally 8-12mm thick.

2. Floor moisture content.

The moisture content of wooden floors is crucial. The moisture content of the purchased flooring must be equal to the local equilibrium moisture content. When buying a floor, be sure to measure the moisture content, if you don't have a moisture content tester, don't buy its board.

The method of balancing the moisture content determination is very simple, first determine the moisture content of the purchased varieties in the exhibition hall, and then open the box to detect the moisture content of the purchased varieties of wood flooring, if the moisture content of the two is only +1%-2%, it is a qualified product.

3. Floor material.

Observe with your eyes whether the floor is of the same material, and whether the board surface has material defects such as cracking, decay, peeling, dead joints, insect eyes, and blue staining. Usually there is no need to be too strict about color differences, joints, textures, etc., which are the natural properties of wood. It is the color difference and the natural texture that changes that show the natural color of the solid wood floor, which is the fashion pursued by the current international home decoration.

4. Machining accuracy.

Generally, after unpacking the wooden floor, you can take out about 10 pieces of freehand assembly, touch it by hand, see whether its processing quality accuracy, finish, whether it is smooth and smooth, and whether the tenon and groove fit, installation gap, denaturation resistance groove and other assemblies are tightly fitted. Observe the tongue and groove occlusion, assembly gap, and height difference between adjacent plates.

5. Floor after-sales.

There are many wood flooring manufacturers on the market, the quality is uneven, it is recommended to choose a good brand of wood flooring, these brand manufacturers will provide perfect after-sales service, and there is a certain warranty period. It can save a lot of worry.

In this way, you can also buy red sandalwood for 200 yuan (made in Bolivia), and the conventional specifications such as 900 * 120 * 18 or 900 * 90 * 18 should be above 350, but I suggest that you can buy non-standard boards, 200 yuan can be bought, and the non-standard specifications are 450 * 90 * 18 or 600 * 80 * 18....The quality is the same, the specifications don't matter! As long as the quality is good.

You can go to see Jinyi's store, we bought it in Jinyi when we renovated our home, they are mainly made of South American materials, and they have advantages in these anti-aspects, so I bought heavy ant wood at that time, more than 400, and it is generally more than 300 over there, and the price of South American wood itself is high. If I remember correctly, it seems that the price of some African materials and Southeast Asia is between 250 and 300. If you don't have special requirements for the kind of material, maybe you can take a look, Jinyi brand is still good, I wish you can find a balance between price and quality.

It is better to use parquet, the price is basically the same.

At this price, you can only buy non-standard small boards, or longans.

First of all, 200 can't buy a first-line brand floor, but if you have time, you can often run the relevant stores, and it happens that the manufacturer does activities or the last ten or twenty square meters need to be processed, and you may also buy it at a very low price, and secondly, I don't know what color you like? What are the requirements for the brand? What are the requirements for wood grain, etc., you need to have a rough range.

Thirdly, is it within the scope of your plan to use solid wood composite now as solid flooring?

If there are no specific requirements, the dark-colored first recommended disc beans (non-state wood) are characterized by good stability and generally no problems. First-line brand group buying (April 26) Wuxi area 285

Qianzhi Zhise flooring recommends fibrilated jade or oak (South American and European wood, first-line brand 286-350), relatively speaking, the stability of oak will be better, but the price will be more expensive.

If you only require a more cost-effective floor, recommend the brand of the line, such as a third-line brand of longan (really good) even the installation cost is only 180, which is very good.

If you can consider solid wood composite. Simba flooring is really good, good quality and affordable. A little more than 200 has a lot of room to choose.