-
The ceiling belongs to the carpentry category, first do a good job of the ceiling, and then use putty to level, there are gaps in the envy of the party with bandages, gauze, indeed good cloth viscose sealed, the most celery Jane after the shoot after rolling latex paint.
Hehe. Good luck! ~
-
The ceiling belongs to the carpentry category, first do a good job of the ceiling, and then use putty to level, there are gaps with bandages, gauze, good cloth viscose sealing, and finally roll latex paint.
Hehe, good luck! ~
-
First make the ceiling, the lamp pool, then lay the wires, and then batch putty to repair the joints, roll coat latex paint or scrape latex paint.
Before the ceiling, the direction of the wires should be considered, and the ceiling and walls should be designed first.
-
The ceiling that needs to be sprayed with ash must be sprayed together after the batch, and the rest will be sprayed before installation.
-
Gypsum board ceilings should be done first, and integrated or gusset can be made later.
In home renovation, choosing paint is a key. But which way to do it is often asked to professionals, according to the decoration master, spray or roller coating which way is better? >>>More
Since the top surface is not absolutely flat, if you spray directly, it is easy to cause unevenness! >>>More
The finish of the spray is high, the surface of the roll is rough (the thinner the roll, the less obvious, the finer the drum hair, the less obvious), strictly speaking, it is good to spray, but the difference between the top effect is not very big, the wall will see the effect nearby, the process of spraying requires on-site protection in place, the protection is not in place and it is difficult to clean up, and the top surface can be sprayed, but if the wall needs to be separated, it still needs to be rolled, so it is generally not too differentiated, as long as the paint base is flat, you can.
Problem 1: Latex paint turns yellow, and there are two kinds of emulsion coarse parts of latex paint, pure acrylic acid (pure propylene acid) and styrene acrylic acid (styrene acrylic). The former will not yellow, and if the titanium dioxide in the latex paint is not good, it will also turn yellow after a long time. There is also the problem of construction, latex paint and paint are applied together. >>>More
The white one is better, because the white one is on the top of the person's head and will not have any effect on the person's mood. And the white is simple and generous, you can use white latex paint for the ceiling, and the surrounding walls can be used in other colors, but the color can not contrast too much, and try not to be disorganized. Chenguang interior wall latex paint water-based environmental protection, moisture-proof and mildew-proof, dirt-resistant and anti-fouling, you can calculate the area of latex paint that needs to be painted at home before buying, and then go to the store to buy, when the time comes, you can use the computer in the store to adjust the color.