-
Anonymous users2024-01-23The center hole of the toilet bowl is more than 300, and the thickness of the tile cement slurry is 20, and it is better to leave 320 mm.
1. The toilet should reserve 4 holes in the civil construction (i.e., S-shaped trap, floor drain, toilet, sewage riser), and 1 hole if there is a pipe under the slab of the cleaning port.
The back is 30 or 40, because the toilet is generally divided into 30 and 40 two specifications, and there is a 28 is the distance between the tiles and then the left and right are generally 20, the size of the toilet (some are slightly smaller), the wall is best to be the center point is more than 45, and then the total length of the toilet is about 75, it is recommended to be the most suitable for the area is a square, the best of course, according to the field situation, the unit of the number is centimeters.
In order not to spoil the overall effect, give up the use of smart toilet seats; >>>More
The toilet covers an area of 80 cm * 150 cm, if there are dwarf objects around, it will not touch the arm and hit the head, and the area can be appropriately reduced. FYI.
If the construction hole is not properly treated, cracks will form around it. In order to prevent the occurrence of cracks, the following construction techniques should be observed in addition to the above-mentioned filling methods. >>>More
Use the impact rotation to make two holes on both sides of the wall, make two steel bars, act as lintels, and then code bricks on the steel bars.