-
Anonymous users2024-01-23Heat the vinegar first, and then wipe the rusty part with a cloth stained with vinegar, and the rust will be easily removed.
Edible vinegar rust removal principle: vinegar contains acetic acid, the component of rust is iron oxide, acetic acid and iron oxide react to form Fe3+ and water.
So the rust melts easily.
Sanitary napkins and bathware anti-rust tips:
When the room temperature is lower than zero degrees Celsius, if you find that the feel of the bathroom is abnormal, you must use hot water to scald the bathroom products until the feel is normal, so that the service life of the bathroom will not be affected after operation.
Water contains trace amounts of carbonated compounds, which are prone to the formation of scale and corrosive effects on the surface of the metal after evaporation. It will affect the service life of the bath, it is very necessary to use a soft cotton cloth or sponge to scrub the surface of the bath frequently, and do not use a metal cleaning ball or scouring pad to clean, which is easy to scratch the surface of the bath. Do not use hard objects to collide with the surface of the bath.
The phenomenon of dripping water after the new bath is closed is caused by the residual water in the inner cavity after the bath is closed, which is a normal phenomenon. If it is ticking water for a long time, it is a problem with the bath and leakage, indicating that the product has a quality problem.
The use of bathware should not be too violent, just turn it gently. Even a traditional faucet doesn't require a lot of effort to screw it to death, just turn off the water. Also, don't use the handle as a handrail to support or use.
-
Anonymous users2024-01-22Put the salt in the same weight of vinegar and stir slightly, wet it with a cloth, cover the rust spots for 20-30 minutes, and then wipe it vigorously with a rough cloth dipped in salt and vinegar mixture to remove the rust spots.
-
Anonymous users2024-01-21Even all-copper products can rust if they are not cleaned and cared for daily. Because the copper used in bathroom hardware products is alloy copper. The mechanical strength of pure copper is not enough to be used to produce bathroom faucets, bathroom showers, and bathroom hardware products.
Therefore, there must be impurities in the copper of bathroom hardware products, if not taken care of regularly, it is easy to rust, especially in places with high humidity and poor ventilation.
Rust removal: cotton + toothpaste, or 999 car wax.
-
Anonymous users2024-01-20The sanitary ware itself is ceramic, where does the rust come from, it is the usual accumulation of dirt, is the precipitation of scale and other substances, if it is a toilet or squatting toilet, (there was sulfuric acid before, but it is not good for the glaze), the dirt of the basin is on the line with five cleaning powder, these things are generally sold in supermarkets.
How do I get rid of odors in the bathroom?
1. Determine whether the tube is useful. There is no iron that can be cut and sold, and the pipes need to be rusted and oiled. First remove the rust with sandpaper, then brush the anti-rust paint twice, and then brush the silver paste twice. >>>More
Focus on the problem of treatment, not how to maintain it. >>>More
If the newly renovated bathroom smells, it's not a trivial matter. The first thing to find out is where the odor is coming from, and check whether the floor drain, toilet, basin drain pipe, and overhead exhaust pipe are installed. Only by identifying the cause can the odor be finally eliminated.