Can I lay hardwood floors in my home with floor heating?

In order to make it no longer cold in winter, many families choose floor heating, after having floor heating, it is indeed very comfortable, so the question is, can the floor heating be laid with wooden floors? What kind of floor is good? The relevant knowledge before installing floor heating must be clearly understood.

There are many kinds of materials suitable for geothermal heating on the market, and the materials commonly used for laying under floor heating are parquet, ceramic tiles, marble, etc., but which one is better? Parquet flooring has a better fit and comfort on the foot, and feels warmer on the wooden floor with bare feet. The heat retention is much better than that of tiles, and when the temperature is reached and the underfloor heating is turned off, the wooden floor can keep the house warm for a longer time.

The reason why you choose laminate flooring over solid wood flooring is that although solid wood flooring is more environmentally friendly, it is not suitable for use as underfloor heating flooring. Because after a long period of use, the solid wood floor will have deformation, glue, cracks and other phenomena, if the floor heating is laid, the probability of thermal deformation will be greater, and it is even possible to warp the whole piece. The performance of laminate flooring is more stable than that of solid wood flooring, and the probability of this phenomenon is relatively low.

Ten precautions for floor heating installation 1. Be sure to find a construction team with professional knowledge of floor heating. "Three points of flooring, seven points of installation", the effect of the amateur decoration team is self-evident. 2. The tightness of the floor heating system must be checked before paving.

3. The ground must be dry (which can be judged by experimental phenomena), and the moisture content of the cement floor should be lower than that; The indoor humidity should not be too large, regardless of whether there is geothermal heating, the ambient humidity is about 60 degrees before and after installation. 4. It is strictly forbidden to nail the ground during construction. After the construction is completed, nailing is also prohibited on the ground to prevent damage to the heating coil.

5. Before laying the laminate floor, the EPE composite film should be laid (the EPE composite film must be marked with the words floor heating radiation) to isolate the moisture and release the moisture from the surrounding baseboards. 6. The keel should not be laid. The low thermal conductivity of the air will affect the heat dissipation effect and may damage the pipe.

7. When laying the floor, it is necessary to use the floor heating glue to increase the use time and effect, and this glue basically does not have to worry about the problem of harmful gas emission 8. Leave enough expansion joints between the floor and the wall, and use a baseboard that is thicker than the current general floor. 9. The paving of the ground and the installation of the baseboard should be divided into two constructions. 48 hours after laying the floor, wait for the glue to dry completely, remove the fastener and then make the baseboard.

10. The floor can be heated 24 hours after installation.

It is possible to lay solid wood flooring, but the selection of wood boards must pay attention to the quality of the board and whether there is a special floor heating. However, it is recommended that the room with underfloor heating should not be used with solid wood flooring, and it should be decided according to the particularity of the geothermal heating method, and it is best to choose a special geothermal floor.

Extended answer: Solid wood flooring is a floor decoration material formed by drying and processing natural wood. Also known as log flooring, it is a floor that is directly processed from solid wood. It has the texture of natural growth of wood, is a poor conductor of heat, can play the role of warm in winter and cool in summer, comfortable feet, safe to use, is an ideal material for floor decoration such as bedrooms, living rooms, and study rooms.

The wood species used for solid wood flooring require beautiful texture, moderate hardness and softness of the material, good dimensional stability and processability. Commonly used solid wood flooring tree species in the national standard "GB stipulates: birch, southwest birch, Pingguo iron sumac, ash, large gamba, Malayan gamba, water green gang, small leaf green, white oak, red oak, bitter oak, oak, beech, teak, neem, wood podum, fragrant two-winged bean, balsam pigeon pea, etc.

The paint coating of the solid wood floor basically maintains the natural color charm of the wood, and the color system is relatively simple, which can be roughly divided into red, brown (coffee) and yellow. Each color range is divided into several different shades, which can be matched with almost all common furniture and popular furniture decorative panels.

1. Industry insiders said that under normal circumstances, the geothermal room can be paved with solid wood flooring, but it is not recommended to use it in this way, and it is best to pave laminate flooring and solid wood parquet instead. Because of the beautiful color and comfortable feel of hardwood flooring, many families use it as the first choice for bedroom floor covering.

2. Solid wood flooring is made of natural wood cutting boards, which are processed by special dehydration and degreasing processes to make standard size boards. But during the heating period, the floor needs to withstand a certain amount of heat, when the moisture in the air is absorbed into the wood, the wood will expand, and when the air is relatively dry, the moisture of the wood will run into the air, making the wood dry and shrink. If you use ordinary solid wood flooring, it is easy to crack and shrink joints.

3. In addition, the solid wood floor cannot meet the requirements of geothermal heat in many aspects, and the solid wood floor needs to be keeled to produce a thick air layer, and the wood itself is a poor conductor of heat. Moreover, the fiber structure of wood has the characteristics of moisture absorption, and it is easy to deform when absorbing water and losing water under the change of temperature and humidity. This affects the life of the flooring and is therefore not suitable for use as floor heating, so it is recommended that owners use laminate flooring and parquet flooring.

Absolutely! In recent years, the rise of geothermal flooring, which has been slow to develop, has found a new direction.

In fact, from the floor of the geothermal history, this category is not going into the consumer point of view, in the last two years, back in the years, there have been a lot of businesses trying to improve it.

Its hot sales, more specifically, are people's excavation of the value of solid wood flooring, making it possible for categories with excellent performance to enter the home.

So, how can this kind of solid wood floor fire function, why is the floor of solid wood floor the most suitable for geothermal environment?

Is hardwood flooring the best "partner" for geothermal heating?

As early as a few years of "hot" events, let the composite geothermal floor at the forefront. The data of serious formaldehyde exceedances in geothermal environments support that environmental problems are a fait accompli. And then what kind of geothermal flooring is used, which is safe and healthy at the same time, but also stable and durable?

This is the primary concern of geothermal users.

Traditional solid wood flooring, with its original appearance, as well as the characteristics of a healthy, comfortable and healthy environment, is more in line with consumers' pursuit of high-quality life. It has become the consensus of the industry that the foot feels better, the comfort is high, and the environmental protection coefficient is high. In order to bring more health and environmental protection, and to introduce more taste of solid wood flooring into the geothermal field, in recent years, the industry has jointly solved the stability of solid wood flooring and pavement maintenance technology, such as excavating and improving the value of solid wood flooring.

Through the joint efforts of the industry, it has been proved that solid wood flooring, through technological improvement, can meet the stability of the geothermal environment, has its own characteristics, and has become the best choice for geothermal flooring.

The above content is provided by the escort network for reference!

It is best not to lay solid wood floors on floor heating, it is better to lay laminate flooring on floor heating, and the reinforced board is a special floor heating floor, but here I want to remind that not all brands of laminate flooring can do floor heating flooring, it is best to buy brand laminate flooring, which is more suitable.

Generally speaking, hardwood flooring is not recommended to be used for underfloor heating, but due to the beautiful color and perfect comfortable foot feel of hardwood flooring, the average Chinese family uses it as the first choice for floor paving materials in bedroom space. Solid wood flooring is a natural wood cutting board, after a special dehydration, degreasing process, made into a standard size board, and finally made a special paint layer that protects the wood.

The choice of geothermal floor should be decided according to the particularity of the geothermal heating method; It is suitable for repeated changes of cold and heat and is conducive to heat conduction. Solid wood flooring is made of simple drying processing of logs, due to the anisotropic characteristics of wood, it is determined that wood is a very difficult to tame, extremely unstable performance of the material; Ordinary laminate flooring is made of fast-growing wood by crushing into wood chips and adhesive high-pressure pressed MDF, which absorbs water and expands very obviously, and is prone to arching or cracks, so these two most common home floors are not suitable for floor heating.

Here and talk about some tips for floor heating flooring, in general, we should grasp the principle of thin and not thick, good environmental performance, and good heat resistance. It is recommended to choose branded and powerful manufacturer products when choosing floor paving, and it is best to choose special flooring for floor heating.

With underfloor heating, is it tiled or wooden? Not many people know about it, so take a look! Life Tips, Life Tips, Life Tips, Life Tips.

It is possible to lay solid wood floors in your home with underfloor heating, but be sure to choose reliable products. Compared with ordinary solid wood, it has to go through a more complex environment, so the wood treatment process and installation method are very important, of course, in the process of use, we should also pay attention to the temperature and humidity of the environment.

Solid wood flooring is a floor decoration material formed by natural wood after treatment and processing. It has the texture of natural growth of wood, which can play the role of warm in winter and cool in summer, comfortable feet and safe to use, and is an ideal material for ground decoration such as bedrooms, living rooms, and study rooms.

If you want to install geothermal hardwood flooring, it is recommended to choose natural flooring. Natural geothermal solid wood flooring, using the core technology of pressing and drying with national patents, can improve the stability of wood by about 20-65%, and at the same time, the use of national new patented steel buckle fastening scheme, can control the dry shrinkage and wet expansion characteristics of the floor to the greatest extent, stable, durable and anti-deformation.

Installing geothermal heat can install solid wood flooring You can rest assured that your installation method is best keel installation. Solid wood flooring should preferably be a larger brand.

If solid wood flooring is to be used in geothermal heating, four key problems must be solved: one is the conductivity of floor heating, the second is dimensional stability, the third is anti-fouling and environmental protection, and the fourth is durability. Some big brands start from these four aspects, so that solid wood flooring can be well used in floor heating.

For example, like Fudeli's pure solid wood geothermal flooring, it integrates pure handmade surface technology and three-layer solid wood structure to become a solid wood floor that is very suitable for geothermal heating.