What is the quality of solid wood furniture?

Solid wood furniture refers to furniture made of natural wood, and the grain of the wood can generally be seen on the surface of the furniture. Its advantage lies in the use of natural wood, the appearance is more natural, and durable, green and environmentally friendly, (the general production process of qualified solid wood furniture) does not contain artificial additives, there is no hidden danger of pollution.

And its disadvantage is also that the use of natural wood makes its price rise; The styles and patterns that can be selected are also limited by the wood itself, and the selection space is relatively small; The material of solid wood is soft and cannot be exposed to sunlight, and it also needs more effort to maintain; Finally, most of the solid wood furniture assembly uses tenon structure and adhesive, and the finished product cannot be disassembled, so special attention should be paid to handling.

One look, two smells, three knocks, four knocks. If you memorize these points, you will easily recognize solid wood furniture...

Take a look: see whether the wooden stubble has a circle or arc-shaped arrangement of pinholes (pipe holes) is regular, to see whether there are straight lines or curves divided into layers between the wood, if there are these, it is wood-based board (veneer), because the real solid wood except rosewood, camphor wood does not have beautiful textures.

Second smell: pure wood has its own special taste, even if it is stored or decorated for a long time, it still has a smell, and there are many woods that will retain a faint taste, such as pine wood has the smell of pine resin, cypress wood has a light fragrance, cedar has a spicy smell, shirt wood has a unique smell, camphor wood will have an obvious camphor smell, basswood has a slight oil smell, the incision of mahogany will have a strong spicy aroma, walnut will be slightly choking, a lot of domestic wood has no smell, wood-based panels will have a strong smell of chemical materials, such as formaldehyde, which is very easy to identify.

Three knocks: Solid wood parts will make a crisper sound when tapped by hand, while wood-based panels will have a low sound, and the wooden parts of the box will make a drumming sound.

Four: According to the weight of the wood, it is divided into three levels: light heavyweight has dried paulownia wood, and medium heavyweight has pine, basswood, autumn wood, etc.

In the north of our country, the medium density wood is called soft wood (except pine), and the heavyweight except for mahogany, rosewood, rosewood and other hardwoods, oak wood, ash and birch and imported liu'an wood are called hard wood, in summary, the wood furniture is lighter than the particleboard, medium density fiberboard furniture.

Pros:1Natural and environmentally friendly, this is the biggest feature of solid wood furniture, solid wood furniture in the process of processing, compared with those wood-based panel furniture, the amount of glue is quite small.

The amount of glue used affects the environmental protection of furniture. Moreover, the solid wood furniture is made of natural wood, which is more environmentally friendly.

2.Solid wood home has the function of value preservation. At the same time, it can bring warm "wood gas" to the home environment, so it is quite popular with middle and high-end consumers. Its advantage is that it embodies nature: natural textures, changeable shapes, and beautiful patterns of wood can generally be seen on the surface of furniture.

3.It has a long service life, generally about 5 times that of other panel furniture, and can be used for about 15 to 20 years.

Cons: 1Due to the different textures and hardness of each slat of the panel, it is impossible to make the thickness of each slats consistent even by the thickness sander, resulting in the unevenness of each slats on the surface of the plate. After painting, the unevenness of the individual slats is more obvious.

2.If the quality of the horizontal spell is poor, the brain spells out the obvious horizontal spell glue seam. If the strength of the horizontal joint is not enough, it is easy to crack at the glue joint.

Therefore, for furniture produced by solid wood wide panels, you can see the height of the slats and the glue seams between the slats when you look at the paint surface of the furniture in the oblique direction of the backlight. If the material selection is exquisite and the process is scientific, this phenomenon will be smaller, but it cannot be fundamentally avoided.

When purchasing solid wood furniture, the selection of precious materials is the most important and durable!

Solid wood furniture is still good because of environmental protection, and Finnish pine is also a good material, which is not expensive and more common. If there is a brand that specializes in selling solid wood furniture, the landlord can go to the hypermarket and Melala to see, and look at a few more before making a decision.

Pros:1Natural environmental protection, this is the biggest feature of the solid wood home bridge ridge dismantling, solid wood furniture in the process of processing, and those wood-based panel furniture, the amount of glue is quite small.

The amount of glue used affects the environmental protection of furniture. Moreover, the solid wood furniture is made of natural wood, which is more environmentally friendly.

2.Solid wood home has the function of value preservation. At the same time, it can bring wild and warm "wood gas" to the home environment, so it is quite popular with medium and high-end consumers. Its advantage is that it embodies nature: natural textures, changeable shapes, and beautiful patterns of wood can generally be seen on the surface of furniture.

3.It has a long service life, generally about 5 times that of other panel furniture, and can be used for about 15 to 20 years.

Cons: 1Due to the different textures and hardness of each slat of the panel, it is impossible to make the thickness of each slats consistent even by the thickness sander, resulting in the unevenness of each slats on the surface of the plate. After painting, the unevenness of the individual slats is more obvious.

2.If the quality of the horizontal spell is poor, the brain spells out the obvious horizontal spell glue seam. If the strength of the horizontal joint is not enough, it is easy to crack at the glue joint.

Therefore, for furniture produced by solid wood wide panels, you can see the height of the slats and the glue seams between the slats when you look at the paint surface of the furniture in the oblique direction of the backlight. If the material selection is exquisite and the process is scientific, this phenomenon will be smaller, and the sensitive jujube cannot be fundamentally avoided.

When purchasing solid wood furniture, the selection of precious materials is the most important and durable!