-
Anonymous users2024-01-23I look for a KTV soundproofing material. Assemble. Dense.
Partition. The main sound insulation material products are damping sound insulation board, honeycomb sound insulation board, cork sound insulation board, asphalt sound insulation board, low-frequency shock absorbing sound insulation board, composite damping sound insulation board, low-frequency sound insulation and vibration insulation board, sound insulation felt, vibration damping glue, etc. KTV soundproofing.
Spraying has the function of sound insulation and sound absorption, and is a good sound insulation material.
-
Anonymous users2024-01-22The power of the audio equipment in KTV is very large, and the sound is transmitted through the air and the solid, the solid mainly transmits the resonance caused by low frequency and low frequency, and the energy and speed of solid transmission are very large and fast, such as the sound from the subwoofer is mainly transmitted through the solid. The high-density combined sound insulation material can well isolate the sound transmission through the air, and the vibration isolation system should be considered in the solid propagation, and the vibration isolation treatment should be designed according to the situation of your site, such as load-bearing, etc. That is to say, vibration isolation is done first, and then high-density sound insulation materials can be used to achieve the effect.
-
Anonymous users2024-01-21The volume of KTV is large, which will produce resonance and easily affect the adjacent room, so it is recommended to use inorganic fiber spraying to insulate the sound and prevent vibration.
The unique damping rubber block of the vibration damping hook can cut off the propagation of the sound bridge, and overcome the solid sound transmission problem of the boom, especially for the KTV (casino) where the subwoofer is located, this is essential, otherwise, no matter how much sound insulation material can not isolate the sound in the private room, maybe someone will add a rubber pad to the screw cap of the boom, but the link between the screw and the pendant can not be padd, so it can only play a little role, and eventually the sound will be transmitted to the upper floor through the boom, therefore, It is the most important facility in the sound insulation project, and it can also be used as a pipe boom in the water engine room or the factory building to restrain the transmission of low-frequency sound, and the effect is very significant.
High-foam sponge plus aluminum-plastic panel, sponge is actually a soundproof material rather than a sound-absorbing material. And it has a thermal insulation effect.
The sound insulation effect of the soundproof ceiling is relative, and it is impossible to completely isolate the sound after installing the soundproof ceiling. Because there are many ways for sound to come from, it can be transmitted from windows, doors, etc., or it can be transmitted through vibrations.
In terms of the materials used in the living room door, the sound insulation performance of solid wood doors and solid wood composite doors is much better than that of paint-free doors, steel and wood doors, molded doors, etc. In terms of the difference in doors, T-shaped doors (German-style doors) have better sound insulation and sealing effect than traditional flat doors.
Regarding the sound insulation of the ceiling, it needs to be solved according to the height of the floor, because the general upstairs walking sound is low-frequency noise, which has strong penetration, and in direct contact with the floor, the solid sound transmission is very serious, so it is very difficult to do sound insulation, and it is difficult to completely reduce noise. Now the more scientific and reasonable solution is to make elastic soundproof ceilings.