The width of the balcony beam spanning 6 meters is 200450 and the secondary beam of the hall is 2004

Updated on Balcony 2024-01-27
1 answers
  1. Anonymous users2024-01-23

    The size of the balcony beam should be related to the length of the pick-out, and the beam height is about 1 6 of the length of the pick-out.

    The area of 2 25 real reinforcement is 981

    The area of 3 20 real reinforcement is 942

    If you do not consider cracks, 2 roots of 25 are suitable.

    If you consider the cracks in the bearing part, 3 roots of 20 are suitable.

    To sum up, my personal suggestion is that 2 roots and 25 are suitable.

Related questions
1 answers2024-01-27

Judging from the introduction and pictures, this balcony building is very unsafe, and such a designer must not have the quality of engineering design. >>>More

1 answers2024-01-27

No problem at all, the 12-thick wall of light bricks, according to the size of 240*115*53, is about 22 kg per square meter, counting cement, it is 30 kg of weight, your wall is a total of 7 flat, 210 kg, 420 catties, 3 adults are heavier than this, not to mention that it is still on the beam, and it is not acting at a point, so don't worry!

1 answers2024-01-27

Safe. Cantilever balcony, 1800mm outside, 4200mm wide, one beam on each side, and the beam can be pressed to do >>>More

2 answers2024-01-27

Depending on how big your house is, the 24-square-meter living room is not too small.

1 answers2024-01-27

The anchorage length and reinforcement method are detailed in the 101-1 atlas, which describes the cantilever beam, which is clear at a glance!